Hardness and elastic modulus of microcastings by nanoindentation;
纳米压痕法测定微铸件硬度及弹性模量
Modified method for the prediction of effective elastic modulus of composite materials;
复合材料等效弹性模量预测方法的改进
Analysis on elastic modulus test of polyaramid fiber yarns;
有机纤维束纱弹性模量测试分析
Influence of modulus of elasticity on the forming precision of lapping tools in the aspherical lapping of bending formation method;
弹性模量对弯曲成形法非球面研磨中磨具成形精度的影响
Study on the modulus of elasticity of composite pad bushed thrust-bearing;
复合材料瓦面推力轴承弹性模量的研究
Simulated annealing-based BP neural network optimization method for back analysis of modulus of elasticity for slope rock mass;
边坡弹性模量反分析的模拟退火BP网络方法
Young's modulus and interface fracture toughness of metal-base ceramic coatings;
金属基陶瓷涂层弹性模量和界面断裂韧度
The Young's modulus and stress rupture lives of single crystal alloys also exhibit obvious anisotropy.
结果表明,晶体取向对合金枝晶组织形态和偏析存在显著影响,而合金的弹性模量和持久性能也存在明显的各向异性。
The Young's modulus in different directions of the films were calculated based on phenomenological theory and orientation distribution function (ODF).
计算了薄膜试样不同方向的弹性模量,研究了织构和甲烷浓度对CVD自支撑金刚石薄膜的宏观残余应变的影响。
If seismic method can detect the changing of elasticity modulus in target strata,it will no doubt help us further understand the development of fractures.
当岩石中含有裂缝时,岩石的弹性模量(主要指体模量、剪切模量、泊松比以及地震波的速度)会发生变化,而且这种弹性模量的变化又随裂缝中是否含有流体而不同。
In this paper, parameters to evaluate the dynamic mechanical property of oil well cement stone are determined to be elasticity modulus aod crashing absorption energy.
确定了水泥石的动态力学性能评价参数为水泥石的弹性模量和水泥石的破碎吸收能。
particle board's elasticity modulus.
针对刨花板、定向刨花板、重组木等碎料板弹性模量的微观力学求解理论进行综述,提出各个板种微观力学模型建立的原则,指出相应的数学模拟计算理论与方法的研究方向,编制计算机仿真计算软件库。
The influence of autoclave sterilization on elastic module and flexural strength of five types of posts;
高温高压消毒对五种桩挠曲强度与弹性模量的影响
Test-study for the elastic module of concrete with long age under the action of fatigue loads;
疲劳荷载作用下长龄期混凝土弹性模量的试验研究
The result of analysis shows that the magnitude of in situ stress has the trend to increase with the increasing of the depth and the elastic module of rock mass,but the relation between the in situ stress and elastic module is not so close as the relation between the in situ stress and depth.
结果表明,地应力值随岩体的埋藏深度和弹性模量的增加而增大,但地应力与岩体弹性模量的关系远不如它与岩体埋藏深度的关系那样有良好的线性关系。
Titanium alloy biomaterials have experienced several periods : commercial titanium, traditional TC4(Ti6A14V) alloy, titanium alloys with no aluminum element, titanium alloys with no aluminum and no vanadium element, and low modulus titanium alloys.
它经历了纯钛、传统TC4(Ti6Al4V)合金、无铝钛合金、无钒无铝钛合金,低弹性模量钛合金等几个阶段。
Ti-Nb alloys have low modulus and good plasticity,and fitting for implanting of body more than others.
通过配制5种成分的Ti Nb合金,研究了Nb对Ti Nb合金弹性模量及力学性能与显微组织的影响。
Based on a self-consistent three-phase model and Mori-Tanaka theo ry, general expressions are deduced to calculate the effective volume modulus an d the effective shear modulus of a composite containing several sorts of hollow microspherical reinforcements.
基于三相球自洽模型和MoriTanaka方法,首先给出了计算含多相球形空心夹杂复合材料有效体积模量和有效剪切模量的一般公式,然后计算了飞灰空心微珠聚丙烯复合材料的有效弹性模量随微珠含量及尺寸的变化规律。
apparent modulus of elasticity of rope
钢丝绳宏观弹性模量
The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus.
通过综合考虑挠度引起弹性模量和弹性伸长引起弹性模量推导出等效弹性模量。
Atomistic Simulations of Elastic Moduli in GaN Quantum Dots
GaN量子点弹性模量的分子动力学模拟
Measurement of Young modulus of wood and the Materials Mechanics Performance
木材弹性模量的测量与材料力学性能
Mechanical Properties of Thin Films and Influence of Films Thickness on Elasticity Modulus
薄膜弹性性能和膜厚对其弹性模量的影响
Analysis of Relation of Coefficient of Thermal Expansion and Elastic Modulus;
热膨胀系数同弹性模量数学模型分析
Analyze the Influence of Elastic Modulus of Posts on Root's Stress Distribution by PSA
桩核弹性模量对牙根应力影响的光弹分析
Influence of Elastic Modulus toValves Designing Parameters of Hydro-Pneumatic Spring
阀片弹性模量对油气弹簧阀系设计参数的影响
Structural Characteristics of Itz and Prediction of Elastic Modulus of Concrete;
界面结构特性及混凝土弹性模量预测
Experimental Study on Relation between Dynamic Elastic Modulus and Shear Modulus of Soil;
土体动弹性模量与动剪切模量关系对比研究
testing method for elastic modulus of high performance ceramics
工程陶瓷弹性模量试验方法
Plastics--Determination of compressive elastic modulus
GB/T14694-1993塑料压缩弹性模量的测定
Method for the determination of the elastic modulus of graphite electrodes
GB/T3074.2-1982石墨电极弹性模量测定方法
Test methods for elastic modulus of high performance ceramics
GB/T10700-1989工程陶瓷弹性模量试验方法
Test method for modulus of elasticity of thermostat metals
GB/T5986-1986热双金属弹性模量试验方法
testing methods for elastic modulus of high performance ceramics at elevated temperature
工程陶瓷高温弹性模量试验方法
Method for determination of the modulus of elasticity in static bending of wood
GB/T1936.2-1991木材抗弯弹性模量测定方法
Investigation on the Elastic Moduli of SiC_p/6066Al Composites;
SiC_p/6066Al复合材料弹性模量的研究