Using the cone anvil made by self, inspect the hardness of small steel ball on WELSON - A653T Rockwell hardness tester ,solve the problem of the small steel ball is slip on the pedestal anvil and "V" shape anvil, difficult to fix,and make the variance analysis to the result compare with traditional method,and to prove the result , of inspect by this way is correct.
在WELSON—A653T洛氏硬度计上,采用自制凹锥形砧座测试微小钢球的硬度,解决了微小钢球在常用平面砧座和V形砧座上易打滑,不易固定,致使压头打在砧座上,损坏压头和砧座的难题,并采用方差分析的方法,将该法与传统试验方法相比较,验证其检测结果与传统法所获检验结果无显著性差异。
The Rockwell hardness tester is a precision measurement instrument in material and part hardness testing, which is often used in detection of materials, product and half-finished product.
洛氏硬度计是检测材料和零件硬度较精密的计量仪器,用来测量材料或者成品半成品的相应硬度,其性能指标主要体现在检测精度和操控性两个方面。
The text particular introduced working principle of Rockwell hardness tester, designed load-up program, analyzed raliability,and according related requirements elected electromechanical and the like components.
传统洛氏硬度计采用杠杆加载,压头多在侧向用紧定螺钉顶紧,长期使用很难保证精度,且需要操作人员的经验和技巧。
Through the subsection digital adjustment, TH320 Rockwell accelerometer gets over the difficulty in adjustment experienced by common Rockwell Accelerometer due to poor demonstration linearity,thus the value indication adjustment becomes easy and convenient.
如何利用手中的有限的标准块,修正标尺整个测试范围内的数据,该文通过实际数据的测试,进一步认识了TH320全洛氏硬度计在示值误差调整方面的特点。
A Comparative Study of Impact Strength and Rockwell Hardness on Nano Composite Denture Base Resin and Traditional Denture Base Resin;
纳米基托复合树脂与传统基托树脂冲击强度及洛氏硬度的对比研究
The Evaluation of Measurement Uncertainty for Rockwell Hardness (Scale A) Test of Cemented Carbide
硬质合金洛氏硬度(A标尺)测量不确定度的评定
The grain size is increa seda little and Rockwell hardness is decreased a little by solid solution treatment at the temperature below grain coarsening temperature(1150 ℃) due to undissolved carbo-(nitride),but grain grow rapidly and Rockwell hardness de.
结果表明,弥散分布的碳氮化物对晶粒长大有显著阻碍作用,在低于该钢的晶粒粗化温度(1 150℃)固溶处理时,大量未溶解的碳氮化物使得晶粒尺寸增幅较小、洛氏硬度小幅下降;在高于1 150℃时,随温度的升高或时间延长,晶粒长大迅速,洛氏硬度大幅下降;晶粒生长指数随固溶温度的升高而呈台阶式增长;在固溶温度为1 050~1 100℃下的晶粒长大激活能为189。
automatic digital display Rockwell hard-tester
自动数显洛氏硬度计
Specifications for Rockwell hardness testers
GB/T2848-1992洛氏硬度计技术条件
Specification for Rockwell superficial hardness testers
GB/T3773-1993表面洛氏硬度计技术条件
Remodeling for HRBS-150 Rockwell Hardness Tester
HRBS-150标准洛氏硬度计的技术改造
Bonded abrasives hardness measurement by Rockwell tester
GB/T2491-1984洛氏硬度计检验磨具硬度的方法
Research on Loading Way and Measurement Methods of Automatic Rockwell Hardness Tester
全自动洛氏硬度计加载方式和测量方法的研究
The Reason Analysis and Exdusion Methods of Fault of Metallic Rochwell Hardness Testers
金属洛氏硬度计的故障原因分析及排除方法
That degree of hardness accounts to be applicable to the black metals and have the color metals with the degree of hardness measurement of the nonmetal material.
液晶屏数显洛氏硬度计适用于黑色金属、色金属和非金属材料的硬度测定。
Table for Comparison of Tensile Strength and Hardness(Brinell,Rockwell,Vicker)
抗拉强度与硬度(布氏、洛氏、维氏)对照表
method rockwell hardness test for plastics
塑料洛氏硬度试验方法
superficial Rockwell hardness tester
轻压力洛氏硬度试验机
The Testing Technology of Rockwell Hardness and Uncertainty in Measurement of Rockwell Hardness Blocks
洛氏硬度测量的误差来源及洛氏硬度块的测量结果不确定度
Evaluation of Uncertainty in Rockwell Hardness Test
测量洛氏硬度过程中不确定度的评定
The Evaluation of Measurement Uncertainty for Rockwell Hardness (Scale A) Test of Cemented Carbide
硬质合金洛氏硬度(A标尺)测量不确定度的评定
Plastics--Determination of hardness by the ball indentation method--Rockwell hardness
GB/T9342-1988塑料洛氏硬度试验方法
Metallic materials-Rockwell hardness test
GB/T230-1991金属洛氏硬度试验方法
Metallic materials--Rockwell superficial hardness test
GB/T1818-1994金属表面洛氏硬度试验方法
semi-automatic optical Brinell hardness tester
半自动光学布氏硬度计