Effect of the carbon nanotube diameter on wear resistance of MWCNTs/PMMA composite system with four diameters was studied in this paper.
研究了具有四种不同碳纳米管径的MWCNTs/PMMA复合物系的耐磨损性。
The effects of TiC particles on mechanical properties and wear resistance of 2A50 Al matrix were studied.
研究了TiC对材料力学性能及耐磨损性能的影响。
Posterior composite resin is used to restore cavities involving stress bearing areas and is required to show high compressive strength,flexure strength, fracture toughness and wear resistance.
后牙复合树脂(posterior composite resin)是指用于涉及到牙齿牙合面修复的材料,要求具有较高的抗压强度、弯曲强度、断裂韧性和耐磨损性。
The effect of content of SiC nano-powders on the microstructure,mechanical properties and wear resistance of nodular cast iron was investigated.
采用改性纳米SiC粉体对球墨铸铁进行了强韧化处理,研究了不同的纳米SiC粉体加入量对球墨铸铁的微观组织、力学性能以及耐磨损性能的影响。
Cermet cladding material is a new kind of material with high wear resistance,which is qualitatively and quantitatively studied by many researchers.
金属陶瓷硬质涂覆层材料是一种具有高耐磨性能的新型覆层材料,许多学者对其耐磨损性能进行了定量和定性研究。
It showed that the sho ck strength, the wear resistance,the tension strength of nano-SiC/PA66 were be st when the content of nano-SiC/PA66 were 10%,3%.
讨论了纳米SiC对PA66耐磨损性能的影响 ,结果表明 :当纳米SiC含量分别在 1 0 %、3%时 ,纳米SiC/PA66复合材料的冲击性能和耐腐蚀性能以及拉伸性能最好 ;并通过扫描电镜对PA66和纳米SiC/PA66的结构进行表
Its abrasive wear resistance was investigated,and surface hardness as a function of impact energy was measured.
5 m球磨机设计了一种低合金钢,研究了其耐磨料磨损性能,并测定了高锰钢表面硬度随冲击功的变化曲线;在冲击功不高的情况下,该钢的耐磨性能比高锰钢好,完全适合于湿式中小型球磨机的使用工况。
Microstructure and Mechanical Properties of Arc Sprayed Ti6Al4V Coating
电弧喷涂Ti6Al4V涂层组织与耐磨损性能
In-situ Preparation and Wear Resistance of Aligned MWNTS/PMMA Composites
定向MWNTs/PMMA的原位聚合制备及耐磨损性
Wear Resistance of Nanosized SiO_2/PMMA Composites Prepared by In-situ Bulk Polymerization
原位聚合纳米SiO_2/PMMA的制备与耐磨损性
Preparation of Plasma-Sprayed Al_2O_3-TiO_2-ZrO_2 Coating and Its Wear Resistance
等离子喷涂Al_2O_3-TiO_2-ZrO_2涂层及其耐磨损性能
Effect of Carbon Nanotube Diameter on Wear Resistance of MWCNTs/PMMA Composites
碳纳米管径对MWCNTs/PMMA复合物耐磨损性的影响
Microstructure and Wear Properties of TiC Strengthened High Chromium Stainless Steel
TiC强化高铬钢的显微组织及耐磨损性能
Comparative study on wear resistance of the enamel oppositing to four kinds of dental metal materials
4种齿科金属材料与牙釉质耐磨损性能的研究
testing method for abrasion of vulcanized rubber (nbs method)
硫化橡胶耐磨性能的测定(nbs磨损机)
testing method for abrasion resistance of textile fabrics: uniform abrasion method
织物耐磨性试验方法：制服磨损法
testing method for abrasion resistance of textile fabrics: flexing and abrasion method
植物耐磨性试验法：挠曲磨损法
Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC Composite
Si_3N_4-SiC复相耐磨材料的冲蚀磨损性能
Impact Abrasive Wear Resistance of New Type Martensitic Wear Resistant Steel
新型马氏体耐磨钢的冲击磨料磨损性能
Influence of Copper on Abrasion Resistance of Wear-Resisting Casting Steel for Mines
铜对矿山用耐磨铸钢抗腐蚀磨损性能的影响
The Fatigue Wear and Wear-resistance of EDM Layer of Cold Stamping Die
冷冲模电火花加工层的疲劳磨损与耐磨性
Investigation of erosion properties of particle reinforced epoxy wear resistant coating
颗粒增强环氧耐磨涂层的冲蚀磨损特性研究
Study on Abrasive Resistance of Haystellite7 Alloy Coating Prepared by Flame Remelting
火焰喷熔Haystellite7合金涂层耐磨粒磨损性能研究
Preparation and Solid-Liquid Erosive Wear Property of Sialon-Sic Ceramic Composite
Sialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究
Research on the Coupling Characteristics of Anti-Erosive Wear of Desert Lizard;
沙漠蜥蜴耐冲蚀磨损耦合特性的研究