Stiffness calculation of coil spring used in locomotive and rolling stock;
机车车辆中螺旋弹簧刚度计算
Non-conservative fussy reliability design of automobile coil spring
汽车螺旋弹簧的非保守模糊可靠度设计
This article take the coil spring as the object of study,proposed structural style,the material,the level of stress and the fabrication technology of coil spring,which should be meet to prolong the coil spring fatigue life and improve smoothnees of the vehicle.
螺旋弹簧是高机动越野汽车悬架系统中的关键零件。
Discussion once again on the improvement method of cylindrical spiral spring design;
再谈圆柱螺旋弹簧设计方法的改进
The optimal design system on CAD of spiral spring;
螺旋弹簧的计算机辅助优化设计系统
Calculating rolling stock spiral spring's stiffness by method of amending spring working height
采用修正工作高度的方法计算铁道机车车辆螺旋弹簧刚度
Nonlinear theory of conical helical spring;
圆锥螺旋弹簧的非线性理论研究
The reliability multi-target optimization design of helical spring;
螺旋弹簧可靠性多目标优化设计
The paper is first contributed to discussing the method calculating the internal natural frequencies of helical springs.
本文首先讨论丁单螺旋弹簧局部振动的固有频率的计算方法,在此基础上进一步建立了串联、并联弹簧局部振动的分析模型,并探讨了弹簧局部振动频率的控制方法。
Based on the center of gravity of cab,this paper offers the improvement ways for helix spring and shock absorber of the heavy truck cab suspension.
文章在测出某重卡驾驶室质心的基础上,对重卡驾驶室悬置系统中前、后螺旋弹簧及减振器的参数进行改进。
Faced with the poor reliability of hydro-pneumatic suspension installed on off-road vehicles,a composite suspension is designed,where the elastic force is supplied by both the helix spring and hydro-pneumatic suspensions.
针对装有油气悬架的车辆在实际应用中所面临的可靠性问题,提出了一种以油气悬架和螺旋弹簧共同作用提供弹性力的复合悬架。
According to[1], the longitudinal shock calculation of the helix spring in the shockproof device is discussed.
讨论了[1]中提出的汽车防撞防振器中螺旋弹簧的纵向冲击计算,同时也简单地介绍了板簧及组合圆柱形压缩螺旋弹簧的计算。
While in mechanical design,the common cam and coiled spring can not be drawn out by applying normal interactive drawing method because of the huge amount of calculation and data.
本文以螺旋弹簧的设计为例介绍利用 AutoCAD VBA 程序快速设计的方法,此方法也可推广至其它涉及参数曲线的零部件的高效设计。
The core-pulling was achieved by applying the deformation of helical spring steel sheet during the ejecting process.
介绍了一种实用的内侧槽抽芯机构,可利用螺旋形弹簧钢板的顶出变形实现内侧抽芯,并阐述了抽芯机构的工作过程和关键技术。
double torsion machine
双列螺旋弹簧卷绕机
HVSS (Horizontal Volute Suspension System)
水平螺旋弹簧悬挂系统
ring with coil-spring expander
螺旋弹簧胀圈活塞环
Approximate Graphics of 3D Spiral Spring and Thread in AutoCAD;
AutoCAD中三维螺旋弹簧、螺纹的近似画法
Analysis Method for Elastic Characteristics of Arc Spring
弧形螺旋弹簧弹性特性分析方法研究
The coil springs is made of a length of special spring steel which is wound in the shape of a coil.
螺旋弹簧是由一长条形的特种弹簧钢制成,绕成螺旋状。
a fine spiral spring that regulates the movement of the balance wheel in a timepiece.
能够调节时钟摆轮的好的螺旋弹簧。
coil spring loaded slotted oil control ring
螺旋弹簧加载双坡口油环
The coil-spring arrangement is the most common.
螺旋弹簧的使用最为普遍。
The optimal design system on CAD of spiral spring
螺旋弹簧的计算机辅助优化设计系统
The Optimization of Helical Spring Based on MATLAB;
基于MATLAB的圆柱螺旋弹簧的优化设计
Coiled Spring Design by AutoCAD VBA;
利用AutoCAD VBA进行螺旋弹簧设计
Cylindrical Spiral Spring of the AutoCAD 3D Solid Modeling
圆柱螺旋弹簧的AutoCAD三维实体造型
Simulation of Static and Dynamic Stiffness Characteristics of Convex Coil Spring based on MSC.Marc
基于MSC.Marc的中凸螺旋弹簧刚度特性研究
Optimized Design of Variable Stiffness Spiral Spring Based on ANSYS
基于ANSYS的变刚度螺旋弹簧优化设计
"Three types of clutch are the coil-pressure-spring type, diaphragm-spring type, and semi centrifugal type."
离合器的三种类型为:螺旋弹簧式,膜片弹簧式和半离心式。
"The automobile uses three Basic types of spring: coil, leaf, and torsion Bar."
汽车使用的三种最基本的弹性元件为螺旋弹簧,钢板弹簧和扭杆弹簧。
"There are three types of coil-spring front suspension. In one, the coil spring is located between the upper and lower control arms, and the lower control arm has one point of attachment to the car frame."
有三种螺旋弹簧前悬挂结构:一,螺旋弹簧安装在上、下控制臂之间,下控制臂的一端与车架相连;