The fatigue crack propagation testing were completed for CT specimens of LZ50 axle steels with continuous casting and mould casting.
完成了连铸和模铸LZ50车轴钢疲劳裂纹扩展试验,得到了两类LZ50车轴钢的疲劳裂纹扩展曲线。
Metallurgical Quality and Contact Fatigue Life of Bearing Steel Produced by Continuous Casting and Ingot Casting;
连铸和模铸轴承钢的冶金质量及接触疲劳寿命
Application of Powder without Free Carbon for Ingot Casting Cold Heading Steel;
无自由碳保护渣在冷镦钢模铸上的应用
Nucleation positin of intragranular ferrite transformation in non heat-treated steel has been studied by means of optical microscope,SEM/EDS and CMA so as to confirm formation ability of IGF (Introgranular Ferrite)in ingot casting non heat-treated steel.
为确认模铸非调质钢晶内铁素体的形成能力 ,对其钢材组织中的晶内铁素体相变形核位置作了光学显微镜观察 ,SEM /EDS和CMA分析。
The result indicates that when uncontrolled flow pouring into the die casting,the air en.
以60 t模铸中间包为研究对象,研究了中间包熔池深度、浇注速度对中间包液面波动的影响,以及各种工况条件下的卷渣情况。
To make(objects)by pouring molten material into a mold.
铸造将（熔化物）注入铸模，得到铸件
A mold in which such metal is cast.
金属铸模金属锭在其中被铸的模子
The cast iron was melted and poured into sand moulds.
铸铁熔化之后，就倒进铸模里。
The Optimization of Die Casting Technology and Die Casting Die;
铝合金压铸工艺与压铸模具优化设计
Impact of Joint Face of Casting Die to Craft Character;
论压铸模分型面对铸件工艺性的影响
The lead was melted down and poured into moulds.
铅被熔化后倒入了铸模。
The gap would be mold of the member.
缝隙将是构件的铸模。
Fracture Analysis of 3Cr2W8V Steel Pressure-casting Die
3Cr2W8V钢压铸模具断裂分析
ingot mould of metal for use in metal
金属铸造金属铸锭模
Study on the Cluster of LFC in Cast Iron&Cast Steel for Small to Medium Casting Process;
铸铁铸钢中小件消失模铸造串铸工艺研究
Made by melting and casting in a mold.
铸造的，浇铸的通过在模子里熔化和铸造制成的
Application of EPC Process in Ductile Cast Iron Casting
消失模铸造在球墨铸铁铸件生产上的应用
Something cast in a mold.
铸件在模具中铸造的东西
The act or process of making casts or molds.
铸造制作铸件或模具的动作或过程
NUMERICAL SIMULATION ON SOLIDIFICATION OF HORIZONTALLY CONTINUOUSLY CAST IRON BAR
水平连铸铸铁棒材凝固过程数值模拟
The Numerical Simulation of the Horizontal Continuous Cast Iron Bar's Solidification;
铸铁型材水平连铸凝固过程数值模拟
Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;
低压铸造铸件充型凝固过程数值模拟
INVESTIGATION ON THE MOLD FILLING CHARACTERISTICS OF GRAY IRON IN THE EPC PROCESS WITH UNBONDED SAND MOLDS;
灰铸铁干砂消失模铸造充型特性研究