Effect of annealing process on microstructure and mechanical properties of severe plastic deformation pearlitic steel wire;
退火工艺对强塑性变形珠光体钢丝组织和性能的影响
Evolution of microstructure and mechanical properties of cold drawn pearlitic steel wires during isothermal treatment
等温处理过程中冷拔珠光体钢丝的组织及其性能
Effect of anneal treatment on the microstructure and mechanical properties of cold drawn pearlitic steel wires
退火处理对冷拉珠光体钢丝组织及性能的影响
The microstructure evolution and mechanical properties of SWRH72B pearlite steel wires were studied,the effect of severe deformation on spheroidizing annealing process in SWRH72B pearlite steel wires was also studied.
研究了剧烈冷拉SWRH72B钢丝的组织演变及大变形量对珠光体钢丝球化退火的影响。
Microstructure and mechanical properties evolution of 65Mn and SWRH82B heavily cold drawn pearlite steel wires were mainly studied in this paper.
本文主要研究了65Mn和SWRH82B珠光体钢丝在剧烈冷拉塑性变形条件下，其力学性能及内部组织的演变规律，系统探讨了：①65Mn和SWRH82B珠光体钢丝剧烈冷拉塑性变形的拉拔工艺和配模规律；②剧烈冷拉塑性变形对65Mn和SWRH82B珠光体钢丝力学性能的影响及抗拉强度与硬度之间的关系；③65Mn和SWRH82B剧烈冷拉塑性变形的强化机制；④剧烈冷拉塑性变形对65Mn和SWRH82B珠光体钢丝显微组织演变的影响；⑤剧烈冷拉塑性变形珠光体钢丝渗碳体溶解的热力学和动力学条件。
The flow stress of ferrite/pearlite steel under uni-axial tension was simulated with finite element method (FEM) by applying commercial software MARC/MENTAT.
应用MARC/MENTAT商用有限元软件,对铁素体/珠光体钢的单向拉伸过程进行了有限元模拟。
This article mainly aims at introducing the welding methods of pearlite heat-resistant steel,the selection of weld materials and the pre-heated temperature before welding.
主要介绍了珠光体耐热钢的焊接方法、焊接材料的选择、焊前预热温度、焊后热处理及其焊接性能等方面的内容,并针对本厂的生产结构制订12Cr1MoV材料的工艺评定、焊接工艺参数以及焊后热处理工艺等。
The non-destructive carbide phase analysis method for pearlite heat-resistant steel used in the past is improved, and it is easy to manipulate and master.
对过去采用的珠光体耐热钢非破坏碳化物相分析方法进行了改进,其操作简单,宜于掌握,分析结果的正确度及精密度得到提高。
THE INFLUENCE OF AGING ON THE MECHANICAL PROPERTY OF A COLD DRAWN PEARLITE STEEL
时效对冷拔珠光体钢力学性能的影响
Study on Wear Resistance of Cold Drawn Pearlite Steel Wire by Annealing Treatment
退火处理冷拉珠光体钢丝耐磨性研究
Cementite deformation and dissolution in a cold-drawn pearlitic steel wire
冷拉拔珠光体钢丝中渗碳体变形与溶解研究
Study on Microstructure and Mechanical Properties of Heavily Cold Drawn Pearlite Steel Wires;
剧烈冷拉塑性变形珠光体钢丝组织及性能研究
Effect of anneal treatment on the microstructure and mechanical properties of cold drawn pearlitic steel wires
退火处理对冷拉珠光体钢丝组织及性能的影响
Relationship between tensile strength and true strain of cold drawn pearlitic steel wire
冷拉珠光体钢丝的抗拉强度与真应变的关系
Influence of Deep Drawing Plastic Deformation and Annealing Treatment on the Microstructure and Three-body Abrasive-wear Mechanisms of 70 Steel;
高强度珠光体钢丝组织及其三体磨料磨损性能研究
An Investigation of Nano-structured Pearlitic Steel Wire and the Three-body Abrasive-wear Mechanisms of It's Composites;
纳米结构珠光体钢丝及其复合材料三体磨料磨损特性的研究
Effect of Mn and Si on Structures and Mechanical Properties of Heavily Cold-Rolled and Annealed Pearlitic Steels;
锰和硅对强冷轧及退火后珠光体钢组织与力学性能的影响
Evolution of microstructure and mechanical properties of cold drawn pearlitic steel wires during isothermal treatment
等温处理过程中冷拔珠光体钢丝的组织及其性能
Microstructure and Mechanical Properties of Pearlite Steel Wire with Large Deformation
大应变量变形珠光体钢丝的显微组织和力学性能
Effect of Annealing Treatment on Microstructure and Properties of Severe Plastic Deformation Cold Drawn Pearlitic Steel Wire
退火处理对大应变冷拔珠光体钢丝性能和微观组织的影响
Low-alloy pearlitic heat-resistant steel welding 20CrMo
低合金珠光体耐热钢20CrMo的焊接
Structure made of pearlitic stabilized cast-iron with parts in stabilized steel.
珠光体铸铁机架，部分部件高强度钢铸造。
Transient Liquid Diffusion Bonding Process of Pearlite Heat-resistant Steel 12Cr1MoV
珠光体耐热钢12Cr1MoV的瞬时液相扩散连接工艺
Influence of Rolling Reduction on Pearlite Grain Size in Heavy Rail of Steel U75V
轧制变形对U75V重轨钢珠光体晶粒度的影响
Measurement on Pearlite Spacing of T12 Steel with Probability Distribution Method
T12钢中珠光体片层间距的概率分布测量法
a steel that contains 0.9% carbon (the eutectic point in the iron-carbon system); a carbon steel with 0.9% carbon is pure pearlite.
含%碳的钢（铁碳混合物的低共熔点），含%碳的碳钢是纯珠光体。