In order to obtain the best synthesis temperature of cordierite by the method of direct sintering, samples were synthesized with pressed raw blocks respectively at controlled temperatures of 1310℃,1350℃ and 1400℃.
为了研究采用直接烧结法合成堇青石的最佳合成温度,对压成的生料块分别在最高合成温度为1300℃,1350℃,1400℃下进行合成,通过对比不同合成温度下得到的样品X射线衍射图,确定出采用直接烧结法合成堇青石的最佳合成温度。
Study on lead-free (Bi_(0.5)Na_(0.5))_(1-x)Ba_xTiO_3 piezoelectric ceramics by direct reaction sintering method;
直接反应烧结法制备(Bi_(0.5)Na_(0.5))_(1-x)Ba_xTiO_3系无铅压电陶瓷的性能研究
As an important branch of SLS, the direct metal laser sintering (DMLS) technology can manufacture metal parts with any geometry shape directly.
因此，建立金属粉末直接激光烧结过程的数学、物理模型，定量研究DMLS烧结致密化过程中的烧结行为和组织结构变化，成为粉末冶金科学与工程研究中的重要内容之一。
Commercial test of direct recovery of alumina and soda in Sintering process
烧结法硅渣直接烧结回收氧化铝和碱工业试验
Fabrication of Al_3Ti Powder by Sintering Directly and its Reaction Mechanism
直接烧结法制备Al_3Ti粉末及反应机理的研究
Microstructure and Mechanal Property of Samples Prepared by DLMS with FGH95 Powder
FGH95粉末激光直接烧结的微观组织及力学性能
Study on Direct Selective Laser Sintering of Ni-Based Metallic Powder and Key Technologies;
Ni基金属粉末激光直接烧结成形及关键技术研究
3D Finite Element Simulation of the Temperature Field and Experiment Study on Direct Metal Laser Sintering;
金属粉末激光直接烧结温度场的三维有限元模拟及实验研究
Commercial Exprement and Production on Using Steel Making Directly Sludge into Sintering Directly;
炼钢污泥直接混入烧结的试验与生产
Numerical Simulation and Sintering Zone Prediction of Direct Laser Sintering of Multi-component Metal Powders
多组元金属粉末直接激光烧结过程数值模拟及烧结区域预测
Research on Direct Laser Metal Sintering of Nickel-based Metal Powder Material;
直接激光烧结镍基高温合金的工艺研究
Experimental Investigation on Direct Metal Laser Sintering of Nickel-based Metal Powder Material
镍基高温合金粉末直接激光烧结实验研究
direct gas-heating system
煤气直接燃烧加热系统
direct-heating gas burner
直接加热煤气灯,直接加热煤气燃烧器
A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
This resulted in a rough and bead-shaped surface, obstructing a smooth layer deposition.
球化的出现妨碍了直接金属激光烧结成形的顺利进行。
Research on the Numerical Simulation and the Structure Optimization of the Tiny-oil Ignition Burner
燃油气化燃烧直接点火的数值模拟和结构优化研究
direct-fired downhole steam generator
直接燃烧式井下蒸汽发生器
Design of direct programming based on CCS DSP external Flash
基于CCS的DSP片外Flash直接烧写设计
a direct result, link, connection
直接的结果、 关系、 联系
not as a direct effect or consequence.
不作为直接影响和结果。