Influence of Gd and Y elements segregation on microstructure and mechanical properties of Mg-9Gd-4Y-0.6Zr and Mg-7Gd-4Y-0.6Zr alloys;
Gd和Y偏析对Mg-9Gd-4Y-0．6Zr和Mg-7Gd-4Y-0．6Zr合金组织性能的影响
The Investigation of Macrosegregation Behavior and Microsegregation of Alloy Elements in GH3044;
GH3044合金宏观偏析行为及凝固过程中元素偏析规律研究
Segregation and Its Mechanism of Al Alloys by Local Pressurization;
局部加压铝合金的成分偏析及其形成机理的研究
The microstructure characteristics and microsegregation of DD2 single crystal have been studied under ultra-high temperature gradient and rapid solidification conditions by laser rapid remelting.
利用激光快速熔凝技术对DD2单晶合金在超高温度梯度和快速凝固条件下的组织形态和元素的微观偏析行为进行了研究。
The metallographic examination and eletron probe analysis have been carried out to investigate the effect of trace element(P,C,Si,Nb) on the solidification microstructure and the solidification microsegregation in Cr-Ni-Mn-N austenitic hydrogen resistant steels.
利用金相法和电子探针研究了微量元素P,C，Si和Nb对采用低偏析均质化技术炼制的Cr一Ni一Mn一N奥氏体抗氢钢凝固组织和微观偏析的影响,结果表明，降低P，C及Si的含量有利于Cr-Ni-Mn-N奥氏体凝固组织枝晶细化，Nb保持适当的含量对枝晶细化有利，分别减少P，C，Si和Nb在实验钢中的含量不仅能大幅降低元素自身的偏析，而且不同程度地影响到其它无素偏
The most suitable process parameters were obtained; the microstructure and microsegregation of the product were analyzed, the effects of process parameters on the microstructure were also obtained.
利用实验室新建立的双辊铸轧机进行了高速钢薄带铸轧实验研究,得到了实验用高速工具钢薄带铸轧的最佳工艺参数;对铸轧高速钢薄带的显微组织及偏析情况进行了分析,得到了主要工艺参数对铸带组织分布的影响规律,为铸轧高速钢薄带的后处理方法及工艺的制定奠定了基础;实验表明,新建立的铸轧系统铸轧过程稳定,能够铸轧出表面质量和边部质量较好的高速钢薄带产品。
Numerical simulation on A-segregates during horizontal solidification in Pb-Sn alloy;
Pb-Sn合金侧向凝固过程A偏析的数值模拟
A mathematical model for the formation of A-segregates during the solidification process of binary alloy was built based on the heat and mass transfer phenomena.
建立了描述二元系合金凝固过程热溶质传输行为的数学模型,利用该模型模拟计算了不同冷却速率下Pb-Sn合金侧向凝固过程A偏析的形成及演化过程。
Effect of cerium on solidification segregation of RE in Hastelloy C 4 alloy has been investigated.
随铈的加入 ,合金中硫由正偏析变为负偏析 ,而本身强烈偏析于终凝区。
Analysis of the Logical Relationship between an Attributive Modifier and the Noun It Modifies & the Chinese Translation;
英语偏正结构的逻辑关系及翻译探析
The On-line Optimization of Power Grid Dispatch Generation Scheduling Error Correction;
电网调度发电计划偏差校正的在线优化分析
The System Analysis on Weak Potential Communities Deviation Behaviors and Their Social Rectification;
弱势群体偏差行为社会矫正的制度分析
Modification of the Shift-Share Method and Analysis on the Competitive Power of Chinese Industry;
偏离-份额法的修正及中国工业竞争力分析
Deviation Analysis and Amendant on PID Temperature-controlling System of Thermal Processing;
热处理炉PID控温系统的偏差分析与修正
Analysis and correction of deviation in control over engineering cost of construction enterprises;
施工企业工程成本控制中偏差的分析与纠正
The Application of Experiment Design of Orthogonal Array in Error Analysis of English Writing;
英语写作中应用正交实验进行偏误分析的研究
Preliminary Analysis on Semantic Duplications betweenModifiers and Heads in Subordinate Constructions;
偏正形式的中心语和修饰语语义重复现象简析
Design Analysis of Octagonal Spread Foundation for Wind Turbine when Extra-eccentricity
浅析大偏心受力正八边形风机基础的设计
Analysis on how to Modify the Financing Preferences of Chinese Listed Corporations
校正我国上市公司融资偏好的对策分析
Then two modified models for CAPM were further analyzed-the model after revising unbiased estimation conditions and dynamically modified model.
并深入分析了capm的两个修正模型:无偏估计条件修正后的模型和动态修正模型。
The current definition being parsed is {0}. The stream offset where the error occured is {1}.
当前正在对定义 {0} 进行语法分析。出现错误的流偏移量是 {1}。
Error Analysis in the Students Spoken English Training in Senior High School;
高中学生英语口语训练偏误分析及纠正对策研究
The Un-realized Change--Try to Analyse the In-depth Reasons Caused the Serious Deviation after the Publication of the Work Correctly Handle Contradictions among the People;
未能实现的转变——试析《正处》发表后不久便发生严重偏离的深层原因
The Deviation and Rectification of the Occupational Pension s Moving Trace in China;
我国企业年金运行轨迹的偏移与矫正——一个企业视角的分析
A contrastive research on high and normal corneal refractive power with myopia
偏高角膜屈光力与正常角膜屈光力伴近视眼的临床对比分析
Comparative research between high and normal corneal curvature with myopia
偏高角膜曲率与正常角膜曲率伴近视眼的临床对比分析