Simulation of Three Dimensional Finite Element of Width Deformation for Rougher in the Rolling Process;
轧制过程中粗轧宽度变形的三维有限元模拟
Effect of rolling and heat treatment on mechanical properties and microstructure of WE43 magnesium alloy;
轧制及热处理对WE43镁合金组织和性能的影响
Probe into Friction Mechanism in the Plastic Working in Rolling;
轧制塑性加工中的摩擦机理探究
Effects of heat treatment on microstructure and mechanical properties of rolled AM50+xCa magnesium alloys;
热处理对轧制AM50+xCa组织及力学性能的影响
Finite element simulation of temperature field during rolling process of low-alloyed wide and thin plate;
低合金宽薄板轧制过程温度场的有限元模拟
Study on the clad ratio and length ratio of metal roll bonding;
金属复合轧制包覆率和长度配比的研究
Deformation distribution of multi-filament superconducting tape during rolling process;
多芯铋系超导材料轧制过程中的变形分布研究
Study on sheet rolling process of SiC_p particulate reinforced aluminum matrix composite;
SiC颗粒增强铝基复合材料薄板轧制工艺研究
The effects of rolling processing on the formability, microstructure and mechanical properties of the asextruded spray co-deposited 7075/SiCp composite were investigated.
本文研究了轧制方式、轧制温度等对SiC颗粒增强铝基复合材料显微组织和力学性能的影响。
Research and development of multi-drive physical simulation platform of the endless rolling system;
无头轧制多级传动模拟实验平台的研究与开发
Welding technology of billets during endless rolling;
无头轧制过程中钢坯的焊接技术
Multidrive system of endless rolling of hot stick mill in Tangshan Iron and Steel Co;
唐钢无头轧制多级传动系统
The technology of roll-bonding was applied to prepare the foaming precursor in this paper.
将轧制复合工艺应用于发泡预制体的制备,研究了粉末致密化过程与面板/芯层的结合机制。
Author studied the production technology of aluminum foam sandwich prepared by roll-bonding/powder metallurgy foaming process in this paper,and analyzed the effect of main technological conditions on foaming structure of sandwich layer,and optimum technological parameters were finally obtained.
研究了采用轧制复合-粉末冶金发泡法制备的泡沫铝夹心板的生产工艺,探讨了主要工艺条件对芯层泡沫结构的影响,得到了优化的工艺参数。
The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.
通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。
Research on drawability of AZ31 magnesium alloy sheet processed by differential speed rolling at room temperature;
异步轧制AZ31镁合金板材室温冲压性能研究
Microstructure of AZ31 magnesium alloy sheets processed by differential speed rolling;
异步轧制AZ31镁合金板材组织
The objective of this study on microstructure and grain orientation of AZ31 magnesium alloy sheets produced by differential speed rolling was to investigate the possibility of improving deformability of AZ31 magnesium alloy sheets.
主要对异步轧制AZ31镁合金板材的显微组织和晶粒取向进行了研究,以探讨提高镁合金板材塑性变形能力的途径。
Effect of rolling oil on the surface quality of annealed aluminum foils;
轧制油对铝箔退火表面质量的影响
Study of influence of antioxidant on stability of rolling oil;
抗氧剂对轧制油稳定性影响的研究
Effect of particle dimension in aluminium foil rolling oil on pinhole formation;
铝箔轧制油中粒子尺寸对针孔形成的影响
In order to make better numerical simulation result in finish rolling and get more reasonable rolling parameters, the process of finish rolling was simulated with updated geometry method of LS-DYNA.
为了更好的对精轧过程进行数值模拟,提供更为合理的轧制参数,以LS-DYNA软件中的单元更新方法模拟了精轧过程。
This paper simply analyses the work of the existing rolling schedule model and the roll shape collocation, and bring forward a project to optimize the rolling parameters and backup rolls on 4-stand tandem cold strip mill.
论文简要分析了鞍钢冷轧厂四机架冷连轧机原轧制规程设定模型和辊型配置方案的应用情况及其存在的问题,提出了对四机架冷连轧机轧制参数和支撑辊辊型配置(包括辊型曲线和辊型凸度)综合优化的方案。