Simulation of Three Dimensional Finite Element of Width Deformation for Rougher in the Rolling Process;
轧制过程中粗轧宽度变形的三维有限元模拟
Effect of rolling and heat treatment on mechanical properties and microstructure of WE43 magnesium alloy;
轧制及热处理对WE43镁合金组织和性能的影响
Probe into Friction Mechanism in the Plastic Working in Rolling;
轧制塑性加工中的摩擦机理探究
Effects of heat treatment on microstructure and mechanical properties of rolled AM50+xCa magnesium alloys;
热处理对轧制AM50+xCa组织及力学性能的影响
Finite element simulation of temperature field during rolling process of low-alloyed wide and thin plate;
低合金宽薄板轧制过程温度场的有限元模拟
Study on the clad ratio and length ratio of metal roll bonding;
金属复合轧制包覆率和长度配比的研究
Deformation distribution of multi-filament superconducting tape during rolling process;
多芯铋系超导材料轧制过程中的变形分布研究
Study on sheet rolling process of SiC_p particulate reinforced aluminum matrix composite;
SiC颗粒增强铝基复合材料薄板轧制工艺研究
The effects of rolling processing on the formability, microstructure and mechanical properties of the asextruded spray co-deposited 7075/SiCp composite were investigated.
本文研究了轧制方式、轧制温度等对SiC颗粒增强铝基复合材料显微组织和力学性能的影响。
Microstructure and texture of Mg alloy sheets fabricated by different rolling methods;
不同轧制方法制得镁合金板材的组织和织构特点
close continuous mill
多机轧制的连续式轧机
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
Sirle-roll Drive and unegual Diameter Rolling for Cold Strip Mill
冷轧带钢轧机的单辊传动和异径轧制
Study of Roller Vibration in Rolling Processes of Cold Tandem Rolling;
冷连轧机轧制过程中轧辊振动的研究
The Determine of Rolling Mill Draught Pressure and Analysis of Stress-Strain in Rolling Process;
轧机轧制过程轧制压力的确定及应力应变分析
Analysis of factors affecting rolling force in rolling zone of eccentric shafts with cross wedge rolling
偏心轴楔横轧轧制区轧制力影响因素分析
This paper dealt with the latest endless rolling technique of hot strip mill.
介绍了最新发展的热轧带钢轧机无头轧制技术。
This can allow the roll to squeeze and relieve undue pressure on the roll .
这能帮助轧辊轧制，还能防止轧辊受力过大。
High-Precision Rolling Force Prediction Model for Hot Strip Continuous Rolling Process
热轧带钢精轧过程高精度轧制力预测模型
The ridges cut on the edges of coins.
轧出的边硬币周围所轧制的边
THE DEVELOPMENT OF ∠12.5 ANGLE STEEL ON THE φ530/φ400 ROLLING MILLS
φ530/φ400轧机实现∠12.5角钢的轧制
A 36-HIGH ROLLING MILL FOR ULTRA THIN METAL STRIPS (0.001mm)
轧制0.001毫米金属超薄带的36辊轧机
Application of the technique of four-strand splitting rolling for bar rolling
四切分棒材轧制技术在连轧厂的应用
Optimum Design Roll Passes of Rolling No.20 Angle Iron Through Medium Section Mill;
中型轧机轧制20号角钢孔型优化设计
The Study on Microstructure Transformation Behavior of CSP Hot Rolling Strip in Rolling Process;
CSP热轧带钢轧制中组织演变行为研究
Experiment Study on the Techniques of the Cold Rolling Steel Matrix Composites;
冷轧钢基复合材料轧制工艺实验研究
Study and Design on Rolling Date MIS in Tandem Cold Rolling;
冷连轧机轧制数据MIS的研究与开发