Three-dimensional dynamic simulation of temperature field of TIG welding and infrared temperature measurement;
钨极氩弧焊温度场三维动态模拟及红外测温
TIG welding with argon shielding on the back of the weld metal and super-low carbon austenitic stainless steel welding wire is used to weld first layer of weld seam of 20/0Cr18Ni9 clad pipe.
采用背部充氩保护的钨极氩弧焊(TIG)和超低碳奥氏体不锈钢焊丝TGS - 30 9L焊接 2 0 / 0Cr1 8Ni9复合管的第 1层焊缝 ,焊后利用金相显微镜、扫描电子显微镜和电化学分析方法对焊接接头的化学成分、金相组织、显微硬度以及抗腐蚀性能进行了研究。
TIG welding process with TGS-309L super-low carbon austenitic stainless steel welding wire is used on the transitional layer of the weld of20/0Cr18Ni9compound pipes.
研究了珠光体钢和奥氏体不锈钢复合管钨极氩弧焊(TIG)接头的性能。
APPLICATION OF FLUX - CORED WIRE TO TIG OF STAINLESS STEEL;
不锈钢钨极氩弧焊药芯焊丝的应用
A Study on the Technology of TIG Welding the Alloys Based on Zn;
锌基合金钨极氩弧焊焊接工艺的研究
Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates
热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能
Role of heat sink in gas tungsten arc welding with trailing spot heat sink for titanium alloy;
钛合金带热沉钨极氩弧焊中热沉作用
The results indicate that a Mg/Al joint with excellent microstructure performance can be achieved by gas tungsten arc welding and the microstructure in the weld metal is fine.
采用扫描电镜(SEM)、电子探针(EPMA)和X射线衍射(XRD)等测试方法,对用脉冲钨极氩弧焊(EMP-TIG)获得的Mg/Al异种材料焊接接头区的组织结构进行了研究。
The simulated results of the temperature field of stainless steel SUS310 in GTAW process showed that pre-data-treatment and post-data-treatment of MARC are more powerful than those of PHOENICS,so it is easy for users to input the boundary conditions and get the results in MARC.
通过应用这两种软件对SUS310不锈钢钨极氩弧焊(GTAW)过程温度场模拟发现,两种软件的前后处理过程存在着明显的差异。
In order to optimize the welding procedure of stainless steel,improve the welding quality and reduce the welding defect,the longitudinal magnetic field was introduced during the welding of austenitic stainless steel with GTAW.
为了优化不锈钢焊接工艺,提高焊接质量,减少不锈钢焊接缺陷,在对奥氏体不锈钢进行钨极氩弧焊时外加纵向磁场,焊后对焊接试样进行弯曲和拉伸试验,并采用电子显微镜对焊接接头进行显微组织分析。
STUDY ON THE AUTOMATIC REGULATION OF TIG WELDING ARC-LENGTH
钨极氩弧焊弧长自动调节装置的研究
The Variable Polarity Tig Welding Control System Based on AT89S52
基于AT89S52的变极性钨极氩弧焊控制系统
Application of automatic argon tungsten-arc welding on large valve members
自动钨极氩弧焊在大型阀件上的应用
Study on Tungsten Inert Gas(TIG) Welding of Stainless Steel Welding
钨极氩弧焊在不锈钢焊接中的试验研究
Inspecting methods of porosity welded joints in TIG welding
钨极氩弧焊焊接气孔产生原因查找方法
The GTAW of Magnesium Alloy in Longitudinal Magnetic Field;
纵向磁场作用下镁合金的交流钨极氩弧焊
Two Person on Both Sides Synchronized GTAW for SUS304 Austenite Stainless Steel
SUS304奥氏体不锈钢的双人双面同步钨极氩弧焊
Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates
热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能
Study on Electron Beam Welding and Tungsten-arc Inert-Gas Welding Techniques of Shell Made of Super-Strength Steel;
超高强钢壳体的电子束及手工钨极氩弧焊接技术研究
Effects of laser shock processing on residual stress of AISI304 TIG welding joint
激光冲击处理对AISI304钨极氩弧焊接接头残余应力的影响
The paper introduced the process with argon arc welding of tungsten electrode to repair turbine rotor of1# generator system.
本文主要介绍了我厂利用钨极氩弧焊将1#电机组汽轮机转子修复的工艺过程。
AC argon arc welding machine with non-consumable tungsten electrode
交流非自耗钨熔化极氩弧焊机
The Research on Gas Tungsten Arc Welded Magnesium Alloy AZ31 Plates;
AZ31镁合金钨极交流氩弧焊工艺的研究
Automatic Rotating Argon Tungsten-Arc Welding of TA16 Titanium Alloy Conduit
TA16钛合金导管的自动钨极旋转氩弧焊
Comparative Analysis of Residual Stress in Tungsten Inert Gas Arc Welding with Continuous and Discontinuous Condition
钨极氩弧连续和间断焊接的残余应力对比分析
Discussion of Manufacture of Coal Used in Pulsed TIG Welding
煤机制造中采用钨极脉冲氩弧焊的探讨
MICROSTRUCTURE ANALYSIS OF INTERFACIAL LAYER WITH TUNGSTEN INERT GAS WELDING-BRAZING JOINT OF ALUMINUM ALLOY/STAINLESS STEEL
铝合金/不锈钢钨极氩弧熔-钎焊接头界面层的微观结构分析
Characteristics of precoating TIG welding-brazing joint of aluminum alloy to stainless steel
铝合金/不锈钢预涂层钨极氩弧熔钎焊接头的特性