FTIR Studies of Oxalate-Bridged Gd(Ⅲ)-Cr(Ⅲ) Hexanuclear Bimetallic Complex;
草酸根桥联的钆-铬六核双金属配合物的红外光谱研究
The effects of an electromagnetic field on the solid-liquid bimetallic interface were investigated to provide theoretical support for the composite roller preparation by centrifugal casting under an electromagnetic field.
为了给液固相复合界面控制提供理论支持,研究了在电磁离心铸造复合轧辊中电磁场对液固相双金属复合界面的影响。
Based on technological experiments and numerical simulation result,its technological process of manufacturing layer-coated bimetallic compounds by dual-moulds continuous casting process was analyzed;Analyzed the effects of some technological parameters to bonding strength,its compounding mechanism was discussed.
在进行工艺试验和数值模拟的基础上,分析了双结晶器连铸工艺制备层状双金属复合材料的工艺过程,结合一些影响结合强度的工艺因素分析,探讨了双金属液 固相的结合规律。
Codeposition and Costripping Models for Bimetal on the Boron-Doped Diamond Surface;
双金属在掺硼金刚石表面电化学共沉积-共溶出模型
Microstructure and mechanical properties of diffusion bonding brass/steel bimetal;
黄铜/钢扩散复合双金属界面组织与性能
Advances in preparation of nano-sized core@shell bimetallic particles;
核壳结构纳米双金属粒子的制备进展
Cu-Ag bimetallic powders whose grain size was similar to the copper powders,were prepared by reduction reaction with hydrazine as the reducing agent by means of inhibiting substitution reaction.
反应体系中引入强还原剂水合肼,通过反应条件的控制抑制置换反应,使银氨溶液优先发生液相还原反应,制备了与原铜粉粒径和形貌大致相同的铜-银双金属粉;采用XRD、EDX、激光粒度分析仪等检测方法对包覆双金属粉的晶相组成及含量、表面包覆层相组成及含量以及粒径分布等加以研究。
The feed proportioning modle for rolling 20Sn-Al steel bimetallic plate is estab lished by the regression method.
应用逐步回归方法，建立了轧制铝锡２０铜─钢双金属板的配料模型；并对模型作自适应修正，提高了模型的预测精度。
The Effect of Technical Parameters of Manufacturing Copper-clad Weld Wire (Bimetals) on the Weld Strength;
工艺参数对双金属线材焊合强度的影响
The nanotechnology is a new promising method for the treatment of halogenated organic compounds,which dehalogenates from organic compounds using nano metals/bimetals.
纳米技术的发展给有机卤化物的处理带来了一种新的颇具潜力的方法,即应用纳米金属/双金属颗粒对有机卤化物进行脱卤。
The practice indicates that the service time of bimetals barrel is above three times higher than that of nitrogen hardening one.
生产应用证明：粉末等离子弧喷焊制造的双金属耐磨机筒的使用寿命高出氮化处理件寿命三倍以上。
On the basis of cold-cross-rolling theory, the applicability of the cold-cross-rolling process for bi-metal tube is discussed in the paper.
本文在冷斜轧理论研究的基础上 ,探讨了冷斜轧复合工艺生产双金属管的可行性。
The deformation of bi-metal tube has been described during the processing of material combinations.
本文叙述了双金属管拉拔复合过程中的变形特点。