Upon wide application of corrosion-resisting aluminum alloy and carbon fiber composite to aerospace industry,the contact between them is inevitable.
随着防锈铝和碳纤维复合材料在航空航天工业的广泛应用,它们间的接触不可避免。
Integrating with the finite element method, the hydro-mechanical deep drawing of alumite LF6 was simulated.
根据模具几何特征 ,通过建立流体力学模型描述液体对板料单元的动态影响 ,结合有限元数值模拟技术对塑性差、难成形材料防锈铝LF6的充液拉深进行数值模拟 ,并进行实验研究 ,得到了防锈铝充液拉深合理工艺参数。
Experimental Study on Milling Forces in High-speed End Milling of LF21 Aluminum Alloy
防锈铝合金LF21的高速铣削试验
Study on the High-speed Milling Process for the Weak Rigidity Workpieces of Anti-rust Aluminum Alloy
防锈铝合金弱刚度复杂构件高速铣削工艺研究
aluminium powder chlorinated rubber anti-rust paint
氯化橡胶铝粉防锈漆
aluminium powder red iron oxide polyester anti-rust paint
铝粉铁红聚酯防锈漆
Preceding coats: Chlorinated rubber aluminum antirust paint or high build epoxy tar antirust paint.
前道配套用漆：氯化橡胶铝粉防锈漆或环氧沥青厚浆型防锈漆。
anticorrosion anticorrosive
防锈漆 a. 防锈的
Alu/Stainless Steel Countersunk
铝/不锈钢 沉头型
Alu/Stainless Steel Standard
铝/不锈钢 标准型
Preceding coats: Any shop primers or chlorinated rubber aluminum antirust paint or high build epoxy tar antirust paint.
前道配套用漆：可以是各种车间底漆，或氯化橡胶铝粉防锈漆或环氧沥青厚浆型防锈漆。
Preceding coat: Chlorinated rubber aluminium or high-build pitch epoxy antirust paints, or spay directly onto bare steel.
前道配套用漆：氯化橡胶铝粉防锈漆或环氧沥青厚浆型防锈漆，或于裸钢上直接喷涂。
all stainless steel, water-resistant, antimagnetic and shockproof
全不锈钢，防水、防磁、防震
STUDIES ON THE DEEP-DRAWING PERFORMANCE OF STAINLESS STEEL/ALUMINIUM/STAINLESS STEEL (SS/Al/SS) COMPOSITES
耐深冲不锈钢/铝/不锈钢复合材料研究
preservative lubricating oil
封存[防锈]润滑油
Rust prevention terminology
GB/T11372-1989防锈术语
LT basic material is high-Quality medium density plate, with fireproof plate(Fenyie)on both faces, aluminium sides and stainless toilet five metal parts.
LT基材为优质中密度板，两面贴（枫叶）防火板，四周铝型材包边，配国产不锈钢厕所五金件。
Lu: su doors and windows, steel doors and windows manufacturing, processing, the installation of steel tubes; PVC sales; Electronic security doors processing; Indoor and outdoor decoration.
铝塑门窗，不锈钢门窗制造，加工，安装；PVC型管材销售；电子防盗门加工；室内外装璜。
The machines must be well protected against dampness, moisture, rust and shock.
机器包装必须防湿、防潮、防锈、防震。
Improvement of joint brazability of aluminum alloys to stainless steel in the air
铝合金与不锈钢大气钎焊性的改善——铝合金与不锈钢焊接技术(二)