Analysis of Weld Shape of SSAW Pipe;
螺旋埋弧焊管焊缝形状参数分析
The weld shape directly influences the weld quality, so it is important to predict the weld shape or establish the mapping between the welding process parameters and the weld shape.
由于焊缝形状直接影响焊缝质量,准确地预测焊缝形状即建立焊接工艺参数与焊缝形状之间的映射关系具有重要意义。
Four different weld shapes were obtained by proper electron beam welding parameters,which are respectively named as bell shape,funnel shape,nail shape,and wedge shape.
并对不同焊缝形状的电子束焊接接头进行了力学性能试验。
Effects of pulsing parameters on weld shape parameters during pulsed Nd-YAG laser welding of aluminum alloys;
铝合金脉冲YAG激光焊脉冲调制参数对焊缝形状参数的影响
Study on Relationship Between Welding Parameters and Weld Shape in Electron Beam Welding
1Cr18Ni9Ti电子束焊接工艺参数与焊缝形状的关系研究
Influence of Weld Shape on Mechanical Performance of the Electron Beam Welded Joint of TC4 Titanium Alloy
TC4钛合金电子束焊缝形状对力学性能的影响
Methods of Studying Welds Shape of TC4 Alloy with EBW
TC4钛合金电子束焊缝形状特征分类研究
Effect of EBW Grid Bias and Cathode Emissive Area on Weld Configuration
电子束焊接栅偏压和阴极发射面积对焊缝形状的影响
Effect on the Joint Quality by the Structure of the Stir Welding Pin;
搅拌焊针结构形状对焊缝成形的影响
Drag onto the page to add concave, convex, or flush welds. Increase height to fit above other weld shapes.
拖到绘图页后，可以添加凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接形状。
Effect of stir-welding head geometry on weld properties
搅拌头结构形状对焊缝性能影响的研究
Process model of arc corrugation on friction-stir weld
搅拌摩擦焊焊缝表面弧形纹形成模型
Research on the Mechanism of Undercut Formation and High Speed Welding Technology
焊缝咬边形成机理及高速焊工艺研究
Use Magnetic-field to Improvethe Appearance of Weld of TIGWelding at a High Speed;
利用磁场改善TIG高速焊的焊缝成形
Effect of welding parameters on aluminum alloy VPPA weld formation
焊接参数对铝合金VPPA焊缝成形的影响
Weld Seam Movement of Magnesium Alloy Tailor-welded Blanks during Deeply Drawing
镁合金拼焊板拉深成形焊缝移动规律
Study on the Acicular Ferrite Formation Mechanism of Weld Metal in Microalloyed Steel;
微合金钢焊缝金属中针状铁素体形成机理的研究
ANN model to predict geometry shape of fusion-solidification zone in electron beam welding
钛合金电子束焊缝熔凝区形状的人工神经网络模型
Research on Welding Seam Formation Characteristics of Manual Arc Welding and CO_2 Gas Protection Welding
手工电弧焊与CO_2气体保护焊焊缝成形特征研究
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
Forming limit and weld seam movement of TWBs with different thicknesses in square cup
差厚拼焊板拉深方盒形件成形极限及焊缝移动
Study of Stamping Formability of Laser Welded Blanks and the Optimization of Weld-line Location;
激光拼焊板的冲压成形性分析及焊缝位置优化