For increasing the resistance to wear and sealing property between bell and hopper of blast furnace the method overlaid welding a lay of TDGC-1 hard alloy on the matching surface of bell and hopper is used.
为提高料钟、料斗的耐磨性能和密封性能 ,采取了在料钟、料斗结合面上堆焊一层硬质合金 TDGC-1的方法。
Big bell rod happens to fracture accident in No 2 blast furnace of Weihai ironmaking works Through analyzing,it is discovered that the main causes of happening accident are weak equipment management,no attention some abnormal phenomena and no adopting reasonable steps before accident appearance This paper puts forward some effective countermeasures based on the analyzin
威铁２＃ 高炉大料钟杆发生意外断裂事故，分析发现事故发生的原因主要是设备管理力度不够，事故前的反常现象判断不明，措施不当。
Techno-economic indicators such as coke ratio equivalent and utilization factor have been improved based on finding charge rules of bell-less BF top, optimizing operating and adjusting tuyere layout.
通过实践摸索出适合无料钟炉顶操作的布料规律,优化操作制度,调整风口布局,使高炉综合焦比、利用系数等各项技术经济指标明显提高。
1 BF come across in production are analysed and solved through combining theory with practice and application on mathematical model of bell-less burden distribution in BF.
将理论与实际紧密结合起来,通过运用高炉无料钟布料数学模型,及时分析并解决了4号和1号高炉生产遇到的关键技术问题,使生产得到强化。
In this paper,according to the effect factors and character of burden distribution for bell-less BF the originel distribution of burden after burder distribution has been simulated by using the burden distribution mathematical model for bell-less BF.
根据无料钟高炉布料影响因素和特点,通过应用无料钟高炉布料数学模型模拟布料后炉料的初始分布,从理论上定性定量研究分析无料钟高炉布料特性。
By combining theory with practice, the rule of charge distribution at bell less top on No 1 BF has been studied Because of flexible and right charge adjustment methods, the operation became smooth and the remarkable benefit has been gaine
针对南钢 1号高炉生产中遇到的难题 ,将理论与实际生产结合起来 ,研究了无料钟布料的规律 ,采取灵活正确的上部调剂手段 ,逐步将生产恢复到和超出正常水平 ,并取得了显著效
Through the analysis and consideration of effect factors and characters in burden distribution of bell less BF,mathematical model for burden distribution of bell less BF is established based on predecessors achievements and computer technology.
通过分析和考虑无料钟高炉布料的影响因素和特点 ,结合前人的研究成果和计算机技术 ,建立了无料钟高炉布料数学模型。
This paper intreduces that in design of blast furnace charging equipment correct option of falling point po- sition of burden and correct option of small bell diameter can decrease and prevent the bisbell and big hoppor weared and impacted by furnace burden,so that the service life of these equipments can be increased,taking top cllarging equipment of No.
本文以济南钢铁总厂第二炼铁厂１￣＃高炉炉顶装料设备为例，简析了装料设备设计中，应考虑炉料落点位置，合理选择小料钟直径，目的是减少和避免炉料对大料钟与大料斗的冲击和磨损，提高使用寿命。
The mathematical model of lamellar distribution of furnace burden of bell-type burden in a blast furnace is presented.
提出了高炉大钟布料的炉内炉料层状分布的数学模型,井结合实际生产数据得出两种典型装料制度下的高炉炉料分布的计算结果图形,证明了该模型有较好的适应性。
bell charging equipment
料钟装料设备(高炉)
The Effect of Small Bell Diameter on the Service Life of Big Bell and Big Hopper
小料钟直径大小对大料钟、大料斗寿命影响分析
after each drop of the skip car, the bell rotates once. The small bell is lowered after a charge cycle is completed, and drops its load onto the large bell.
料车每倒人炉料一次，小料钟转动一次。当一个装料圆周完成，小料钟下降，将炉料放到大料钟上。
When the circumference of the large bell is loaded by the small bell, the large bell is opened and the stock is dropped into the furnace.
大料钟的圆周都装上炉料后，大料钟降下，炉料便装入炉内。
When ω=0, equation (69) changes into the stock distribution equation of bell type.
当ω=0时,方程(69)变成料钟型布料方程.
The Development of the Top Distribution Mathematical Model on Ansteel
鞍钢无料钟布料数学模型研制与应用
MATHEMATICAL MODEL OF BURDEN DISTRIBUTION FOR BELL-LESS TOP OF BLAST FURNACE
高炉无料钟布料炉料分布预测模型的开发研究
Control techniques for bell-less top in the new No. 3 BF of WISCO
武钢新3号高炉无料钟炉顶控制技术
Installation of bell-less top steel ring for blast furnace
炼铁高炉无料钟炉顶钢圈的安装技术
Application of Tungsten Carbide Bell
高炉碳化钨料钟(斗)的应用与实践
Application of BG-Ⅲ Bell-less Top in the Iron-making Plant of Baotou Steel
包钢炼铁厂BG-Ⅲ型无料钟炉顶的应用
Welding Technique of Automatical Hidden Arc Overlay Welding for Matching Surface Between Bell and Hopper of Blast Furnace
高炉料钟、料斗配合表面自动埋弧堆焊焊接工艺
Automatic control system for N0 3 BF belless top in Meishan Metallurgical Co
梅山3~#高炉无料钟炉顶布料自动控制系统
The new methods of burden distribution with width burden in a bell-less top blast furnace
高炉无钟炉顶按料流宽度布料新方法
It was shown experimentally that after opening the large bell the furnaceburden had already been released thoroughly before the burden completes itstravel predesigned in bell.
实验表明,大钟开启后,炉料未到大钟规定行程就漏料完毕。
It can stitch sixty meters of fabric per minute.
它每分钟可以缝六十米的布料。
I imagine he'll have finished the job by six o'clock.
我料想他6点钟以前会完成这项工作。
The coatings with dye are rinsed in water for 10 seconds.
含有染料的涂层用水洗10秒钟。