Study on melt and casting technologies of new super-strength aluminum alloy rectangle ingot;
新型超高强铝合金扁铸锭熔铸工艺研究
Microstructural evolution of a 7050 semicontinuous casting ingot during DSC analysis process;
7050铝合金半连续铸锭在DSC分析过程中组织的变化
Effect of sizes of semicontinuous casting ingots on as-cast microstructures of Al-6.5Zn-2.3Mg-2.3Cu alloy
半连续铸锭尺寸对Al-6.5Zn-2.3Mg-2.3Cu合金铸态组织的影响
The constituents in the semicontinuous casting ingot of the super-high strength Al-6.
3Cu超高强铝合金半连续铸锭的结晶相及其在470℃均匀化处理过程中的变化规律。
The Problem Solving of Gas Cavity Quality Deficiency on Aluminum Alloy 4004 Flat Cast Ingot
4004铝合金扁铸锭气孔缺陷问题的解决
Melt purification in the course of producing aluminum alloy slab by using electrolytic aluminum melt
用电解铝液生产铝合金扁铸锭的熔体净化工艺
Hot-top Casting of Large-scale 5052 Aluminum Slabs
5052铝合金大规格扁锭热顶铸造实践
Eliminating Surface Defects to Increase Quality Rate of Cast Aluminum Slab Ingot
有效消除表面缺陷 提高铝扁锭铸造成品率
Study of Gas Protection System for Graphite Crystallizer in Horizontal Continuous Casting;
黄铜扁锭水平连铸石墨结晶器气体保护系统的研究及设计
ingot mould of metal for use in metal
金属铸造金属铸锭模
This paper stated high ternperature thermal stress measuring technique,method and results analysisunder casting site for large flat ingot steel mould of rare-earth nodular cast iron.
介绍了稀土球铁大型扁形钢锭模在浇铸工况下高温热应力的测试技术、方法和结果分析。
Zinc alloy ingots for casting
GB/T8738-1988铸造锌合金锭
Aluminium alloy ingots for casting
GB/T8733-1988铸造铝合金锭
Bearing alloy ingots for casting
GB/T8740-1988铸造轴承合金锭
The moulds are made of cast iron.
钢锭模是用铸铁做的。
Bronze ingots for casting
GB/T8739-1988铸造青铜锭
Brass ingots for casting
GB/T8737-1988铸造黄铜锭
Aluminium-silicon alloy ingots for casting
GB/T8734-1988铸造铝硅合金锭
Quality Control of Recycling Magnesium Alloy Ingot and the Casting Machine Design;
再生镁合金铸锭质量控制及铸锭机设计
A mold in which such metal is cast.
金属铸模金属锭在其中被铸的模子
Melting and Casting Process Investigations on Large Size Ingot of AA5182 Al-Mg Alloy;
AA5182大型Al-Mg合金铸锭熔铸过程研究
The Research on Technology of Virtual Assembly of Designing 1ngoter of 20 Kg Aluminum Caster;
20Kg铝锭连铸机搭锭机构的虚拟装配设计