The conclusion that the contact states of the wheels are closely related with the load distributions is made through the rule of the stress changes around the circle direction of the crown wheel.
基于ANASYS软件对不同载荷分布下的端齿盘有限元模型进行了分析,通过端齿盘圆周方向的应力变化规律,得出齿的接触状态与载荷分布密切相关的结论。
Then analysis results were input into structure model and point-point contact elements were used to simulate contact state of different nozzle materials.
然后,将温度场分析结果导入结构分析模型,用点-点接触单元模拟喷管材料之间的接触状态,对温度和压强载荷联合作用下的应力场进行了分析。
The motivation behind this work is to realize the programming by demonstration of robot work in contact state, and to transfer forcebased skill to robot.
为实现机器人接触状态下作业的演示编程,使机器人获得人的基于力信息的作业技能,首先提出了描述接触状态的元素接触形式,用元素接触形式序列建立技能模型,根据不同的接触形式具有的不同腕力分布,利用支持向量机(SVM)对不同的元素接触形式进行辨识。
The analysis of assembly contact states is a key content during the process of robot assembly manipulation.
由于装配环境的复杂性和检测、控制信息、装配件运动的不确定性,在研究装配接触状态时要考虑误差的影响。
, the judgment of contact states is rough.
Kamiya提出的弹性接触问题边界元分离解法和申光宪、陈一鸣、刘德义等引入最优罚因子的边界元分离解法,关于计算中接触状态的判别比较模糊,所得接触区与真实接触区相差很大。
The determination of contact states and stresses for elastic contuct problems with friction requires an iterative process.
弹性摩擦接触问题的接触状态和接触应力的分析需要进行迭代，迭代过程是很费机时的。
The algorithm can be conveniently applied to determining the contact condition of the clearance joint.
提出了一种确定曲柄滑块机构间隙运动副反力的简单算法 ,作为这种算法的具体应用 ,进一步给出了间隙运动副元素接触状态的判断方法 ,最后 ,通过一个算例说明了该方法的可行性。
Tips on welding of Aluminized sheet in comparison with cold rolled steel strip
镀铝钢片的焊接状态(比较冷辘钢片)
Online Monitoring of Laser Welding Penetration Status and Its Pattern Classification;
激光焊接过程熔透状态实时监测与模式分类
The Microstructure and Mechanical Properties Study of Nickel Based Transition Dissimilar Steel Joints at Different PWHT Condition
镍基过渡异种钢焊接头在不同热处理状态下的性能研究
MICROSTRUCTURES AND MECHANICAL PROPERTIES OF FRICTION STIR WELDED JOINTS OF ALUMINIUM ALLOY THICK PLATE WITH DIFFERENT WELDING STATES
厚板铝合金搅拌摩擦焊接头不同状态微观组织与力学性能
INFLUENCE OF EDGE CONDITION OF SLIT-STEEL STRIP ON WELDING QUALITY OF SMALL SIZED HEAVY-WALLED WELDED PIPE AND RELEVANT CONTROL MEASURES
纵剪带钢边缘状态对小直径厚壁焊管焊接质量的影响及其控制措施
Welding Quality Thermal Control System With Resistance Welder for Narrow Lap Welding
窄搭接电阻焊机的焊接质量热态控制系统
Leaving the valve in a fully closed position helps prevent weld spatter from falling directly onto the mating faces of the seats.
保持阀门处于完全关闭状态，有助于防止焊花飞溅直接落到阀座连接面上。
Study on Relationship Between Welding Parameters and Weld Shape in Electron Beam Welding
1Cr18Ni9Ti电子束焊接工艺参数与焊缝形状的关系研究
Submerged arc welding procedures of large-scale intersection and modeling of welding gun gesture
大型相贯线埋弧焊接工艺研究及焊枪姿态建模
Preparation and welding performance of amorphous interlayer alloys for TLP bonding
TLP焊用非晶态中间层合金的制备及焊接性能
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
Status analysis of chinese welding equipment industry in 2006;
2006年度我国焊接设备行业状况分析
The Status of Development and Trend on New Welding Procedure of Cemented Carbide
硬质合金焊接新工艺发展现状与趋势
PRESENT SITUATION AND PROSPECTS ON CRROSION PERFORMANCE OF 2205DSS WELDMENTS
2205DSS焊接腐蚀的研究现状与前景
Study on the Dynamic Characteristics of the Welding Lathe Bed and Casting Lathe Bed
焊接床身与铸造床身的动态性能研究
Investigation of Semi-Solid Welding of SiCp/6061Al Composites;
SiCp/6061Al复合材料半固态焊接研究
Dynamic Simulation of the Linear Friction Welding Process of Blisk;
整体叶盘线性摩擦焊接过程动态仿真