melting capacity

基本解释熔化能量

网络释义

1)melting capacity,熔化能量2)melt-out energy,熔蚀能量3)melting heat energy,熔化热能4)melting property,熔化性能5)fusing energy,熔化能6)melting capacity,熔化能力

用法和例句

Abstract According to the correlation between deformation work and melting heat energy,the experimental method of uniaxial tension is applied to measure melting heat energy and deformation heat effect in this paper.

本文根据变形功与熔化热能的关系,将简单拉伸实验方法推广应用到了熔化热能和变形热效应的测量上。

Agglomeration and melting property test of used refining slag after modification;

精炼渣改性后的成块和熔化性能测试

Experimental Study on Melting Properties for CaO-Al_2O_3-MgO Slag System with Low-melting-point Zone

CaO-Al_2O_3-MgO渣系低熔点区熔化性能的实验研究

Molten Salt Synthesis and Electrochemical Properties of Manganese Dioxide

熔盐法制备二氧化锰及其电化学性能

Study on Laser Cladding Oxidation Resistance Coatings and Its Properties;

激光熔覆抗氧化涂层及其性能的研究

Microstructure and Properties of Laser Direct Deposited TA12 Titanium Alloy

激光熔化沉积TA12钛合金的组织及性能

Capable of being fused or melted by heating.

易熔的,可熔化的通过加热能被融化或熔化的

CHANGE OF THE MICROSTRUCTURE AND ITS EFFECT ON THE SOFTENING-MELTING PROPERTY DURING THE SOFTENING-MELTING PROCESS OF SWEDISH PELLETS

瑞典球团矿在软熔过程中的显微结构变化及其对软熔性能的影响

Microstructure and Erosive-corrosive Wear Characteristics of Induction Cladded Ni/Cr_3C_2-NiCr Coating

感应熔覆Ni基合金/碳化物熔覆层的组织与冲蚀磨损性能

Performance of SiC fibers synthesized with neutron irradiation curing method

反应堆辐照不熔化法制备碳化硅纤维的性能

Study on Physico-Chemical Properties of Al_2O_3-CaO Base Premolten Refining Slag;

Al_2O_3-CaO基预熔精炼渣冶金物化性能的研究

The Structure and Properties of Quinary High Entropy Alloys with High Melting Temperature;

高熔化温度五元高熵合金组织及性能研究

Study on Microstructures and Properties of Non-consumable Gas Shielded Arc Welding for Magnesium Alloys AZ31;

AZ31镁合金非熔化极气体保护焊工艺及性能研究

Microstructure and Oxidation Resistance of Laser-remelted YPSZ Coatings on TiAl Alloy Surface

TiAl表面激光重熔YPSZ涂层组织及抗氧化性能

Microstructure and mechanical properties of laser melting deposited titanium alloy

激光熔化沉积TC2钛合金显微组织及力学性能

Double Drive Melt Pump Performance and Gear Structure's Parameterization Design

双驱动熔体泵性能与齿轮结构的参数化设计

Molten Salt Synthesis of Nanocrystalline SnO_2 and its Catalytic Properties to Ethanol

熔盐法制备纳米SnO_2及其对乙醇的催化性能研究

Discussion on application of intelligent ash fusion temperature analyzer in coal quality testing

智能灰熔融性测定仪在煤质化验中的应用探讨

Effects of curing technics on properties of composite resins containing whisker-particles compound

固化工艺对晶须熔附颗粒复合树脂性能的影响

Low Temperature Molten-Salt Synthesis and Electrochemical Properties of LiV_3O_8 Nanobelts

LiV_3O_8纳米带的低温熔盐合成及其电化学性能(英文)

最新行业英语

行业英语