Research on Soldering of Copper and Aluminum;
铜与铝软钎焊技术的研究现状
Interfacial reactions between Sn-Cu solder alloy and Cu/Ni coatings during reflow soldering;
SnCu钎料镀层与Cu/Ni镀层钎焊接头的界面反应
Research on ultrasonic detection for soldering quality of elastic metal-plastic bearing pads;
弹性金属塑料瓦钎焊质量超声检测的试验研究
State-of-art in Simulation of Brazing Packaging for Miniaturized Multi-channel Heat Exchanger;
微小型多通道换热器钎焊封装仿真研究现状
Microstructure and strength of C_f/C composites joint brazed with Cu based brazing filler metal;
铜基钎料钎焊碳/碳复合材料的组织及强度
Wettability and interfacial reaction product of electron beam brazing of Ni-base superalloys K465;
K465镍基高温合金电子束钎焊润湿性及界面产物
Review of the present research on brazed monolayer cBN wheels;
钎焊立方氮化硼砂轮的研究评述
Study on the wear of brazed diamond grits;
钎焊金刚石磨粒磨损性能研究
Preliminary Experimental Study of Monolayer Diamond Brazed Grinding Wheel;
单层钎焊金刚石砂轮工艺研究初探
Analysis about part bulge during pressing test of 434 alloy cover sheet braze welding hot exchange for air separator;
434包覆板钎焊空分机换热器打压试验局部起鼓原因分析
general situations of the techniques for bonding beryllium and other materials were summarized, the different bonding method, such as braze welding, melt welding and diffusion brazing were analysized and some successful welding techniques were introduced, some existing limitations were discussed in welding of beryllium.
结合铍的焊接性,论述了当前国内外铍的焊接技术概况,针对钎焊、熔化焊、扩散焊等焊接工艺,介绍了一些比较成功的铍的焊接工艺以及部分连接工艺,同时分析了铍焊接中存在的缺陷问题。
The different bonding method,such as braze welding,diffusion welding and melt welding were introduced and the existing problems were discussed.
对铍的连接技术 ,如钎焊、扩散焊、熔化焊等焊接方法现状进行了分析 ,并介绍了具体连接方法 ,提出了存在的问题和解决办法 ,有助于提高铍的连接质
The Study on Structural Transition and Diffusing Behaviour of Amorphous Cu-P Filler Metals;
非晶Cu-P钎料钎焊过程的组织转变及扩散行为研究
Simulation of vibration amplitude distribution during ultrasonic brazing
超声波钎焊过程中振幅分布的数值模拟
Numerical simulation for transient behavior of fluid flow and heat transfer in laser-brazing pool of beryllium plate
铍材激光钎焊过程中熔池流场和热场的动态模拟技术
Bonding process of pure copper with amorphous Cu-P interlayer
非晶Cu-P钎料钎焊接头形成过程
Numerical Analysis of Fluid Flow and Velocity Field during Liquid Filler Droplet Spreading Behavior in Arc Brazing;
电弧钎焊钎料液滴铺展过程及其流场、速度场数值模拟和分析
Interfacial reaction between solder alloys and metallization during laser solder bonding process for optical fiber alignment
光纤定位激光钎焊键合过程中钎料与镀层的界面反应
Interfacial Reactions and Alignment for Fiber Bonding by Laser Soldering;
光纤激光钎焊键合过程中界面反应及对准研究
Study on Laser Brazing with Filler Wire for Galvanized Steel Sheets and Numerical Simulation of the Thermal Process;
镀锌钢板激光填丝钎焊工艺与热过程数值模拟
Technical specification for welding copper and copper alloys
铜及铜合金焊接及钎焊技术规程
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
The assembly should be firmly supported so that it will remain in alignment during the brazing operation.
组装是要保证有稳固的支撑,使得整个钎焊操作过程中能够保持在直线位置。
Experimental Investigation on Grinding Engineering Ceramics with Brazed Diamond Abrasive Wheel;
金刚石钎焊砂轮磨削工程陶瓷的试验研究
Numerical Simulation of Forming Process on Odd Number Side Hollow Drill Steel;
奇数边中空钎钢成型过程的数值模拟
Microstructure Transformation during Ramp-up of Weld in Brazing Copper with Cu-P Amorphous Fillers
非晶铜磷钎料升温过程中的组织演变
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;
非晶Cu-P钎料的性能及钎焊机理研究
Ti-25Cu-25Zr Filler Metal and Pure Titanium Brazed Process
Ti-25Cu-25Zr钎料与纯钛的钎焊工艺