Analysis of fracture residual stress of naval gun large-scale cast aluminium piece;
舰炮大型铸铝件断裂残余应力分析
Several Technological Problems about Low Pressure Cast with Metal Mould for Large Aluminium Castings;
金属型低压铸造大型铝铸件的几个工艺问题
Cu-Sn alloy wires were prepared by the "heated-mold continuous casting+cold deformation+ recrystalliza- tion annealing + cold deformation" technics.
通过"热型连铸法+冷拔+再结晶退火+冷拔"工艺制备的Cu-0。
The contrast of heated-mold continuous casting of copper rod experiments on two different structural molds were carried out.
用两种结构铸型进行了热型连铸铜杆对比试验研究,结果表明,提高铸型温度梯度有利于稳定固液界面的位置,从而扩大热型连铸工艺参数配合的范围。
By approprizte process parameters,the Al-1%Si alloy wire with good surface quality and unidirectional dendritic crystal was fabricated on the self-made horizontal heated-mold continuous casting equipment.
在自制的水平热型连铸设备上,采用一定的工艺参数,制备出了表面呈镜面,内部组织沿轴向定向排列的柱状晶Al-1%Si线材,其与金属型生产的多晶线材相比,屈服强度提高40%,伸长率提高35。
The Process Research of Producing Medium-and-large Scale Aluminium Casting Using Transfer Coating;
转移涂料生产中大型铸铝件工艺研究
Extrusion Casting Application in Production of Largescale Complex Casting of Aluminum Alloy;
挤压铸造在大型复杂铝合金铸件生产中的应用
Development of Aluminum Alloy Large Complicated Vehicle Power Parts by Die Casting
大型复杂铝合金汽车动力部件的压铸技术开发
A Study for Application of Low Pressure Casting Technology in Large Thin Wall Aircraft Casts of Aluminum Alloys;
低压铸造在大型薄壁航空铝合金铸件上的应用研究
Numerical Simulation and Optimization for Counter-pressure Casting Process of Large-scale Thin-wall Al Alloy Cylindrical Casting
大型薄壁铝合金筒体铸件差压铸造过程数值模拟与工艺优化
Counter-pressure Casting Process Design of Large Thin-wall Al Alloys Cylindrical Casting Based on Numerical Simulation
基于数值模拟的大型薄壁铝合金件差压铸造工艺设计
Testing Technique of Negative Pressure Mold-Filling of Electromagnetic Pump for Precision Aluminum Casting
精密铝铸件电磁泵负压充型测试技术
Casting Technique of Large-Scale Aluminum Gearbox Block Used for High-Speed Train
高速列车用大型铸铝齿轮箱箱体铸造工艺
It's used for the production of large castings.
它用于大型铸件的制备。
The Development and Application of the New Light-colored Coating for Resin-bonded Sand Mold and Core for Aluminium Casting
铝铸件树脂砂型芯用新型涂料的研制和应用
Optimization of Forming Process and Defects Analysis of Aluminum Alloy Die Casting;
铝合金压铸件缺陷分析及成型工艺优化
Pinholes Prevention of Middle and Small Aluminum-Alloy Castings by Metal Mould
预防中小金属型铝合金铸件针孔的研究
Influence of Pressure Condition on Aluminum Alloy Hub during Filling Process of Die Casting
铝合金轮毂压铸充型阶段压力条件的影响
Non-linear Pressure Condition in Filling of Aluminum Alloy Wheel in Low Pressure Die Casting
铝合金轮毂低压铸造充型非线性压力条件
Numerical Simulation of Mold Filling and Solidification Process of Aluminum Alloy in Pressure Die Casting
铝合金压铸件充型凝固过程的数值模拟
Lu: mei alloy die-casting; Auto Parts die-casting; New metal materials research and development, production and marketing.
铝镁合金的压铸；汽车配件压铸；新型金属材料的研制、发、产销售。
The Research on the Fundamental Problem of ZA27 Alloy Squeeze Casting with High Ratio of Height to Thickness;
大高径比高铝锌基合金铸件挤压铸造成形问题的研究
Study on Squeeze Processing of ZA Alloy Casting with High Ratio of Height to Thickness;
大高径（厚）比锌铝合金铸件挤压铸造工艺技术研究