Based on the experience with more than 10 years running shell mould casting line and with the application of various resin coated sands,some technical problems of resin coated sands for shell mould castings were discussed.
根据壳型生产线十几年运行和各类覆膜砂应用的经验,对壳型铸造用覆膜砂的一些技术问题进行探讨。
This paper introduces briefly main technological features and application of shell casting techniques and equipments.
简要地介绍了壳型铸造工艺及设备的主要工艺特点及应用情况。
This research analyses the material with experiments,and does some techniques optimization for the crankshaft shell casting,finding the range of the quantity of the trace elements in the ductile iron and adequate temperature of casting;technical standards and the selection of coated sand.
针对柴油机曲轴运行过程中易产生弯曲疲劳断裂、耐磨性低等问题,通过试验优化了球铁曲轴壳型铸造工艺,给出熔化工艺过程中微量元素含量的控制范围及孕育剂、孕育处理和浇注温度;提出了铸造工艺中覆膜砂的选择及达到的技术要求,使此工艺设计成功地应用于工厂大批量生产。
Study on Thin-Wall and Low-Roughness Ceramic Shell Mould Based on EPS Process
薄壁光整消失模壳型铸造的型壳研究
Research on Application of Shell Casting Technology of Nodular Castiron Crankshaft of S1100 Diesel Engine;
S1100柴油机球铁曲轴壳型铸造工艺的应用研究
An Improved Technical Design for Crankshaft Shell Casting of Single-cylinder Diesel Engine
单缸柴油机曲轴壳型铸造工艺优化设计
Sand casting - hand molded-machine molded (and shell)
砂型铸造-手工造型-机器造型(和壳型)
Parameters Optimization of Air Impact and Air Push Molding Machine for Motor Housing Casting
电机壳铸件气冲气推造型参数的优化
Shellmould Fabrication for the Investment Casting of Titanium Aluminides;
TiAl基合金熔模精密铸造用型壳制备工艺研究
Study on foaming coating of ceramic shell mould of colloidal silica bander in investment casting;
精密铸造硅溶胶粘结剂型壳发泡涂料的研究
Study of particle size distribution in mold shell for titanium alloy investment casting
级配法用于钛合金精密铸造型壳的研究
Static finite element analysis on cast case of large-scale centrifugal compressor
大型离心式压缩机铸造机壳的静态有限元分析
CAD/CAE of Permanent Molds Casting Process for Rail Drill House & Cover of Aluminum Alloy and Optimization;
钻机壳体/壳盖铝合金金属型铸造工艺CAD/CAE及优化
The Experimentation Study of the Low-pressure Foundry Techniques of the Hull Castings;
壳体类铸件的低压铸造工艺试验研究
Cast Technology of Cast-steel Shell Based on ProCAST
基于ProCAST的铸钢件壳体铸造工艺研究
Application of low pressure casting in Al-Si shell casting parts
低压铸造在铝硅壳体类铸件中的应用
Study on Technology of Investment Cast for Titanium Alloy Using Low Cost Oxide Ceramic Mould Shell;
钛合金低成本氧化物陶瓷型壳熔模精密铸造技术研究
We can also adopt sand shell moulding or metal mold casting as for allotype castings.
对异形铸件，还可用砂型铸造或金属型铸造。
Lost Foam Casting Process of Nodular Iron Main Driver Housing
球墨铸铁主传动器壳体消失模铸造工艺
Moreover a factory also produces the metal mold casting, the centrifugal casting, the continuous casting and other casting and so on.
另外本厂还生产金属型铸造、心铸造、续铸造及其他铸造等。
Research and Application of the Mold Shell Baker Used in the Precision Casting Line
精密铸造模壳焙烧生产线的研制应用