The specification and study of national codes on the technical performance of structural adhesives;
结构胶粘剂工艺性能标准的研究与制定
According to the peculiarity of structural adhesives,the paper describes the development of an environment controllable automated tension testing system.
根据结构胶粘剂力学性能测试的特点,提出了一种在可控环境条件下对结构胶粘剂进行拉伸性能测试的自动化测试系统,并详细介绍了该测试系统的设计原理、硬件组成和软件实现,以及环境温度和湿度等的控制方法。
history and four developmeut stages in China and some other countries about room temperature curable epoxy resin structural adhesives (RTCERSA)were descriped.
本文描述了室温固化环氧树脂结构胶粘剂的历史和四个发展阶段。
In the paper, the present situation of high temperature curing structure adhesives and their application both at home and abroad are summaried, and their future development discussed also.
本文介绍了国内外高温固化结构胶粘剂概况，重点介绍了国内高温结构胶粘剂的现状及展
With polyurethane(PU) modification of the blend of phenol-based epoxy propane(E-51) and diglycidyl-4,5-epoxycyclohexane-1,2-dicarboxylate(TDE-85),the high performance TDE-85/E-51 epoxy resin structure adhesive was prepared with the mixed aromatic amine as curing agent.
以混合芳胺为固化剂,通过聚氨酯(PU)对4,5-环氧环己烷-1,2-二甲酸二缩水甘油酯(TDE-85)与二酚基丙烷缩水甘油醚(E-51)环氧树脂的改性,制备了一种高强高韧的耐高温环氧树脂结构胶粘剂。
Effect of humidity on specimen properties of structural adhesive FM300k;
湿度对结构胶粘剂FM300k测试样本性能的影响
Intermediate temperature setting solvent -free epoxy resin structural adhesive with high tenacity and high peeling strength modified by PU;
中温固化高强度高剥离无溶剂聚氨酯改性环氧树脂结构胶粘剂
Epoxy resin structural adhesive with high-temperature resistant of one component at intermediate temperature;
中温固化单组份耐高温环氧树脂结构胶粘剂
Medium temperature curing one component inorganic/organic hybridization heat-resisted constructional adhesive;
中温固化单组分无机/有机杂化耐高温结构胶粘剂
Modification epoxy heat -resistant constructional adhesive cured at room temperature often concludes: CTBN modification epoxy resin ;ATBN or polyetheramine modification curing agent.
目前室温固化耐高温环氧树脂结构胶粘剂主要采用液体端羧基丁腈橡胶增韧环氧树脂为主体,以改性液体端胺基丁腈橡胶或聚醚胺为韧性固化剂,其最高使用温度仅120℃。
The Study on High-performance Structural Adhesive of Epoxy Resin for Architecture;
高性能环氧型建筑结构胶粘剂的研制
Study on Heat-resistant Structural Adhesives of Bismaleimide;
耐高温双马来酰亚胺型结构胶粘剂的研究
Study on the Toughening Modification of Structural Adhesive Based on Process Engineering
基于过程工程学原理结构胶粘剂增韧改性研究
Study on toughening modification of structural epoxy resin adhesive for building
环氧树脂建筑结构胶粘剂增韧改性研究
Comparative Analysis of the Products Glued with Evaluation of the Creep Characteristics
室外木结构用胶粘剂胶合制品抗剪切性能评价
Comparative Analysis of the Products Glued with Exterior Wood Structure Adhesive Evaluation of the Delamination
室外木结构用胶粘剂胶合制品分层试验对比
Study on Properties and Evaluation of Adhesive Used in Bamboo-based Structural Materials;
结构用竹质工程材料胶粘剂及其性能评价研究
Influence of functional monomer structure on performance of orthodontics adhesive
功能单体结构对口腔正畸胶粘剂性能的影响
Influences of polyurethane structure on bonding performance of epoxy resin adhesive modified by polyurethane
聚氨酯结构对聚氨酯改性环氧树脂胶粘剂粘接性能的影响
To stick or fasten with or as if with glue.
胶合用或像用粘剂粘起或结合起来
testing methods for flexural strength of adhesives
胶粘剂粘结挠曲强度的试验方法
Rubber cement: Adhesive used for pasting-up.
橡胶胶水:拼帖用的粘结剂。
The Conformation of Hydrophobic Soybean Protein Isolate and Studies on New Adhesive
大豆疏水分离蛋白的结构表征及新型胶粘剂的研究
The freezing point of the modified bone glue produced by this technics is very low and the adhesive strength is very high.
所得到的改性骨胶粘合剂凝固点低 ,粘结强度高
The Bonding Technology of Multiple Geo-Membranes and the Test of New Type Agglomerant;
复合土工膜粘结技术及新型胶粘剂的研究
Underwater Adhering Performance of α-Cyanoacrylate Adhesive Modified with Nano-Silica
α-氰基丙烯酸酯胶粘剂改性后的水下粘结性能
The results show that this adhesive has good properties.
结果证明该胶粘剂具有优异的性能。
core, shell structure
核一壳结构（粘合剂制造中形成的结构）