Processing Parameters for Aluminum Alloy Gradient Materials in Double-stream-pouring Continuous Casting (DSPCC);
双流浇注连续铸造铝合金梯度材料的工艺参数
The 7075/6009 composite ingots with diameter of 65mm were prepared by double-stream-pouring continuous casting.
采用双流浇注半连续铸造技术制备了7075/6009梯度复合铝合金铸锭,分析了铸造工艺参数对铸锭外层合金厚度的影响。
Control the process of the influencing factors by mold liquid steel level stable,open flow casting and tundish clogging,and that lead to continuous casting slabs cavity defect in cold rolled steel.
从连铸工序和轧制工序分析了冷轧钢孔洞缺陷的形成原因,提出了具体的预防对策:严格控制结晶器液面稳定、敞流浇注、中间包结瘤等,可以有效的减少成品孔洞缺陷的产生。
It's mainly used in ladle backing layer and tundish backing layer.
自流浇注料还可采用机械化施工。
Relationship between rheological properties and flowability of corundum based self-flow castables
刚玉质自流浇注料流变性和流动性的关系
It is called“ The Fourth Generation Castable”.
莫来石质自流浇注料适用于钢包永久衬和中间包永久衬。
Rheological property of bauxite based Al_2O_3-MgO vibration castable
矾土基Al_2O_3-MgO质振动浇注料的流变性能
Design of auto-stripping injection mould with parting-out in sequence and pin gate mechanism
顺序分型点浇口自动脱料注射模设计
The flow rate, beams result shows the amount and rate of polymer that is delivered through runners into the mold cavity, allowing you to optimize the runner system design.
柱体元素流动率?示柱体元素内塑料的流动率，主要是浇注系统，为优化浇注系统提供依据。
Study on Alumina-Magnesia Precast Block and Flow Property;
铝镁质浇注预制块的研制及其流变性能的研究
Rheological Study of Sol-Gel Bonded High Alumina Castables
溶胶-凝胶结合高铝质耐火浇注料的流变学研究
Effect of Dispersants on the Rheological Behavior of the Matrix Slurry of Corundum Based Castables
分散剂对刚玉质浇注料基质流变行为的影响
Complex Heat Treatment of Casting Molds for Type LMZ Current Transformers
LMZ型电流互感器浇注模具的复合热处理
The Application of Image Recognition Method Based on Hu-moment Invariants in Auto-pouring System
Hu不变矩识别算法在自动浇注系统中的应用
Study on Constant Volume Weight Control Technology for Pb-Ca Alloy Automatic Casting System(Cound.)
铅钙合金自动浇注系统恒容重控制技术研究(续)
Study on Constant Volume Weight Control Technology for Pb-Ca Alloy Automatic Casting System
铅钙合金自动浇注系统恒容重控制技术研究
Design of Pb-Ca Alloy Automatic Casting System Based on The S7-300PLC
直线往复式铅钙合金自动浇注系统设计
Optimization Design of Runner System and Default Control in the Injection Molding Based on Flow Simulation;
基于流动模拟的注塑成型浇注系统优化设计与缺陷控制
The Study of Flow Behavior of Plastic Melt in the Gating System of Injection Mold
塑料熔体在注射模具浇注系统中的流动行为研究
In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.
下注法是把钢液浇人中心注管，钢液从中心注管通过流钢槽流到若干个钢锭模底。
Preparation of High-Performance Corundum Castable Refractory Used for FBC Boilers
循环流化床锅炉用高性能刚玉质耐火浇注料的研制