Three kinds of mechanical plated coatings were formed with 325 or 800 mesh spherical zinc powder and zinc-aluminum compound flakes from ball-milled and 325 mesh spherical zinc-aluminum mixed powder(10% Al).
为研究机械镀镀层性能与原料粉之间的关系,采用325,800目球形颗粒状锌粉和325目球状锌-10%(质量分数)铝粉混合球磨成的片状锌-铝复合粉制成3种机械镀镀层,考察了金属原料粉及形成镀层的SEM形貌。
The properties of mechanical plating of zinc and zinc-aluminum;
机械镀锌及锌铝复合镀层性能研究
Effect of rare earth on formation and property of coating deposited by mechanical plating without crystallizing;
稀土对机械镀无结晶形成过程及镀层性能的影响
Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.
通过在机械镀锌过程中添加不同量的稀土金属盐,在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
Choosing of impact media for mechanical plating;
机械镀锌冲击介质的选择
Mechanism of mechanical deposition in mechanical plating;
机械镀锌沉积机理的研究
The production process of mechanical zinc plating on hinge;
铰链机械镀锌的生产工艺
Cause analysis of zinc ball production in mechanical zinc plating;
机械镀锌过程锌球产生的原因分析
The process of surface treatment of cast iron hardware and the process flows of its mechanical zinc plating were introduced.
介绍了铸铁五金件的表面处理工艺及其机械镀锌工艺流程。
The surface Zn coating by mechanical zincification technology was suaessfully applied for highway guardrail bolt.
高速公路护栏螺栓采用机械镀Zn的表面处理工艺 ,与热浸镀相比具有保证质量、镀层厚度可按要求任意控制、耐腐蚀性能好、生产效率高、成本低、后处理简单等优
Effect of Strengthening Time on Properties of Mechanically Deposited Zinc Coating
机械镀锌中强化时间对锌镀层性能的影响
Study on Zn-Al-RE Compound Coating Obtained by Mechanical Plating Process without Crystallization
无结晶形成Zn-Al-RE机械镀合金镀层研究
Analysis on the Value of JDX-100 Machinery Galvanized Equipment
JDX-100型机械镀锌主机设备的价值分析
Deposition of Tin as a Driving Metal and Its Effect on Me-chanical Plating of Zinc
机械镀锌中先导金属锡的沉积与作用
Effects of Particle Shapes of Zinc on the Properties of Mechanically Deposited Coating
锌粉颗粒形状对机械镀锌层性能的影响
Effects of Drying Temperature on Phase Compositions and Properties of Mechanical Galvanizing Coatings
烘干温度对机械镀锌层物相组成和性能的影响
dicraft article and machine part
离子镀工艺品和机械零件
Electroplate and chemical mechanical polishing technology of ULSI
VLSI的电镀和化学机械抛光技术
All the mechanical parts been electroplated, he began to examine them one by one.
所有的机械部件都电镀好以后，他开始逐个检查。
The Empirical Study on Mechanical Properties of Plating Gilded on Ni-Cr Dental Alloy with Non-cyanogen Gilding Technology;
牙科镍铬合金表面镀金层机械性能的实验研究
Study on Mechanical Performance of High Frequency Pulse Electroforming Ni-Co Alloy;
高频脉冲电镀镍钴合金机械性能的研究
Skin pass mill is used to improve surface quality and mechanical properties of the coating.
本机组采用光整机的主要用途是改善镀层表面质量和机械性能。
Pre-plating cleaning for parts to be plated,oil and dirt removing for metal mechanical.Parts,cleaning semi-conductor Si-chips,spectacle frames and glass vessels.
电镀零件镀前清洗、五金机械零件去油圬。半导体硅片、眼镜架、玻璃器皿等。
Sep 2000：The No.1 Continuous Galvanizing Line was well-installed and commissioned.
2000年09月：第一连续镀锌线生产机械安装完成，试车运转。
Students work with different vintages of tools, from computer controlled to chrome plated.
学生利用电脑控制操作各种不同的特殊机械来镀铬。
Effects of Mechanical Stirring on Microstructures and Properties of Nan o-composite Coatings
机械搅拌对纳米复合镀层微观组织及性能的影响(英文)
Research on Enhancing the Contact Fatigue Strength of Cast Iron Machine Elements with Alloy Coating and Alloying
表面合金镀层和合金化提高铸铁机械零件接触疲劳强度研究
The Tension leveller is used to improve strip shape and mechanical properties.
本机组采用拉伸弯曲矫直机的主要用途是改善镀锌带材板形及机械性能。