Stability analysis by means of finite element method for the composite material revolution shell and the effect analysis of the transverse shear deformation;
复合材料旋转壳稳定性有限元分析和横向剪切变形的影响分析
The problem of nonlinear dynamic buckling of symmetrically laminated, cylindrically orthotropic truncated shells including transverse shear has been studied.
建立了对称层合圆柱正交异性开顶扁球壳考虑横向剪切的非线性振动微分方程 ,根据突变理论建立了该壳体动态屈曲的突变模型 ,得到了动态屈曲的临界方
The linear and geometric nonlinear buckling load including transverse shear deformation are calculated by Timoshenko first-order shear deformation theory and Reddy higher-order shear deformation theory respectively.
本文利用一阶剪切理论和Reddy高阶剪切理论计算了考虑横向剪切变形影响的复合材料层合圆柱壳的线性失稳载荷和几何非线性失稳载荷。
The displacement field ensures the continuity of displacements and transverse shear stresses at each interface and includes the influence of transverse shear deformation on the response of laminates.
该位移场满足层间位移和横向剪应力的连续性，较充分反映了横向剪切对层合板壳力学行为的影响，但位移场的变量和运动方程均为五个，与一阶剪切变形理论相同。
According to the three-dimensional virtual work equation, the nonlinear equations of equilibrium that include the effects of transverse shearing a(?)e derived for thick rectangular plates on Winkler foundation.
根据三维虚功方程,导出在Winkler地基上,考虑横向剪切影响的矩形厚板的非线性平衡微分方程,得到四边简支矩形厚板在均布、集中及线载荷作用下的精确解。
The buckling governing equation with consideration of lateral shear effect is solved by finite difference method.
研究复合材料层合杆被一质量块以某一速度沿轴向进行碰撞而导致的动力屈曲现象,采用不同的横向剪切理论,并用差分方法对杆的动力屈曲方程进行求解。
Exact calculation of the optical path difference and lateral displacement of modified large optical path difference Sagnac interferometer in full view field used in upper atmospheric wind field measurement;
高层大气风场探测改型大光程差Sagnac干涉仪全视场角光程差与横向剪切量的精确计算
The shearing principle of Savart polariscope in the static polarization interference imaging spectrometer (SPIIS) is presented and the exact expression of the lateral displacement and optical path difference (OPD) are deduced by ray-tracing method and the notion of ray index at random incidence angle.
应用光线追迹法以及光线折射率的概念,分析了计算光在双折射横向剪切分束器———萨伐尔(Savart)偏光镜中的传播规律和光线路径;给出了任意角度入射时,萨伐尔偏光镜横向剪切量和光程差的理论计算公式。
The shearing principle of modified Savart polariscope in the static large field of view polarization imaging spectrometer (SLPIIS) is presented and the exact expression of the lateral displacement and optical path difference are deduced.
本文分析了基于视场补偿型萨瓦偏光镜的稳态大视场偏振干涉成像光谱仪(SLPIIS)的分光机理,并给出了其横向剪切量和光程差的精确计算公式,为偏振干涉成像光谱仪的设计、研制和调试提供了理论和应用指导。
Research on Wavefront Character and Reconstrution Based on Lateral Shearing Interference;
横向剪切干涉的特性研究和波面重建
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程
Transverse shear is due it that impact loading is not instantaneous.
由于冲击加载并不是瞬时的,这导致了横向剪切.
Our Collimation Testers are lateral-shearing interferometers that can be used to examine and adjust the collimation of laser light.
我们的剪切板准直度测量仪是用于检查和调整激光光束准直度的横向剪切干涉仪。
The seismic source parameters of the 1991 Costa Rica aftershock sequence: evidence for a transcurrent plate boundary
1991年哥斯达黎加余震序列的震源参数:横向剪切板块边界的证据
Predic on Bulk Modulus and Transverse Shear Modulus of Multiphase Fiber Composites;
混杂纤维复合材料横向剪切模量和体积模量的预测
Displacement fundamental equations of the thick plates bending and the general solution to simply supported rectangular plates by transvers shearing defomation
考虑横向剪切变形厚板弯曲的位移型方程及简支矩形板的一般解
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The detection and reconstruction of wavefront by Lateral Shear Interferometer (LSI) and Hartmann Wavefront Sensor (HWS) have been deduced analogically and simulated numerically.
对横向剪切干涉仪和哈特曼波前传感器的波前探测和复原进行了类比推导和仿真计算。
On Nonlinear Bucking of Symmetrically Laminated, Cylindrically Orthotropic, Truncated Shallow, Conical Shells under Uniform Pressure Including Transverse Shear;
考虑横向剪切的对称层合圆柱正交异性截顶扁锥壳在均布载荷作用下的非线性屈曲
cross shearing machine
横向剪毛机,纬向剪绒机
crosscutting machine
横向剪毛机,纬向剪毛机
longitudinal and transverse shear for aluminium and alloy
铝及金属纵横剪切机
Control of fixed length and flatness of aluminum plates produced by 1500 transverse cutting machine
1500横切机剪切铝板的定尺和平直度控制
multiple beam lateral-shear interferometer
多光束横向切变干涉仪
Negative shear test on soil-concrete interface using simple shear apparatus
土与混凝土接触面反向剪切单剪试验
Test method for longitudinal transverse shear(L-T shear) properties of fiber reinforced plastics
GB/T3355-1982纤维增强塑料纵横剪切试验方法
The Electric System of the 1850mm Cross Cut Line and the Deviation Analysis of the High Speed Rotary Shear;
1850mm横切机列电控系统及旋转飞剪误差分析