Harm and treatment of welding fume(1);
焊接烟尘的危害及治理技术(一)
A engineering practice about the welding fume treatment was introduced from a shipping container.
介绍了某集装箱厂焊接车间焊接烟尘收集、处理的工程实例,采用的工艺是集阻火过滤器、阻燃型纳米纤维滤筒、活性炭纤维过滤器为一体的多级过滤除尘设备。
The study on welding dust is focused on the mechanism, nature and treatment at home and abroad, and there is no diffusion method and motion trail.
目前国内外对焊接烟尘主要集中在发生机理、性质和治理等方面的研究,但对其在室内的扩散方式、运动轨迹等方面几乎没有具体的探讨。
This paper makes a description of the generation, composition and influence factors of weld fume.
叙述了焊接生产过程中烟尘的产生、构成及其影响因素 ,指出 ,为了创造安全、卫生和舒适的劳动环境 ,保证生产安全和焊工身体健康 ,必须采取有效方法和措施 ,最大限度地降低甚至消除焊接烟尘带来的各种危害。
Influence of dust concentration distribution on secondary blowing dust;
烟尘浓度分布对二次扬尘影响的探讨
Optical Information Collection and Analysis of Welding Fume in MIG Welding
MIG焊焊接烟尘光电信息的采集与分析
Research on Photoelectric Detection System of Welding Fume in GMA Welding
GMA焊接烟尘光电检测系统的研究
Apply to remove the dust under situation of welding soot, mechanical process, pharmacy, cement and viscosity medium.
适用于焊接烟尘、机械加工、制药、水泥工业及粘性介质的过滤。
Approach on welding fume forming of FCAW of Ti-based slag system affected by welding electric parameters
焊接电参数对钛型渣系FCAW烟尘产生的影响
Study on joint effect of welding fume and noise on hearing impairment
电焊烟尘及噪声联合致作业工人听力损伤作用
Comparative study of the early lungs manifestations of the electric welding and the silicon dioxide dust induced on HRCT
电焊烟尘与矽尘所致肺部异常的早期HRCT表现的对比研究
AN INVESTIGATION ON THE GASEOUS FLUORIDE IN WELDING FUME OF BASIC ELECTRODE
碱性焊条焊接烟气中氟化物气体的研究
Use a blast cleaner or power tool to remove weld flux slag, weld metal spatters, weld flux fume deposits, rust and damaged paint film in welded areas.
通过喷砂或电动工具除去焊渣、飞溅焊烟、锈迹和焊接部损坏的漆膜。
Research and Design of the Device Purifying the Electric Welding Smoke and Dust with the Corona Plasma on the Spot;
电晕等离子体就地净化电焊烟尘的研究与装置设计
Study of Effects and Mechanism of Combine Exposure to Welding Fumes and Noise on Hearing;
电焊烟尘与噪声联合作用致听力损伤及其机理研究
Investigation on health hazards in workers exposed to weld fume in container producing enterprises in Yangzhou city
扬州市集装箱企业电焊烟尘对工人健康危害的调查
Design and Application of Plasma Cutting Smoke and Dust Cleaning System for SSAW Pipe Unit
螺旋焊管机组等离子切割烟尘净化系统的设计与应用
Study on effects of welding fumes and noise exposure on hearing loss of workers
电焊烟尘与噪声联合作用对作业工人听力损伤的调查
Welded Joints Cracking Analysis on Gas Turbine Pipeline Made of Austenitic Stainless Steel
烟机管线奥氏体不锈钢焊接接头开裂失效分析
A Prospective Cohort Study on the Effect of Occupational Dust Exposure and Smoking on Mortality;
职业接触粉尘、吸烟对死亡影响前瞻性队列研究
Analysis of pulmonary ventilation function of workers exposed to cigarette dust;
烟草粉尘对接触工人肺功能损害的调查分析
Finite element simulation on the effect of welding residual stress on the metal dusting corrosion of welded joint
焊接残余应力对接头尘化腐蚀影响的有限元模拟
Over-application of ZSS010 will result in increased levels of weld fume on cutting and welding, and will also increase the porosity of the welds.
如果涂覆过厚，切割和焊接时会产生大量的焊烟，并增加焊接处的孔隙。