Mineralogical composition and microstructure of high basicity sinters of Laisteel,Baosteel,Ansteel,and Jiusteel were investigated by X-ray diffraction,optical microscopy and scanning electron microscopy.
采用X射线衍射、光学显微镜和扫描电镜对莱钢、宝钢、鞍钢和酒钢烧结矿进行了研究,提出了高碱度烧结矿(w(CaO)/w(SiO2)=1。
20,aimed at the determination of most appropriate sintering parameters for the production of high basicity sinter.
20倍高碱度烧结矿的烧结工艺参数进行试验研究,以寻求与高碱度烧结矿生产相适应的烧结工艺参数。
On the basis of analyzing the material conditions and the sinter quality (R=1 65～1 95) of №2 sintering plant in Hangang during January to August in 2000,the view of production of high basicity sinter(1 8～1 9) could be helpful to increasing sinter output and improving sinter quility was propose
通过对 2 0 0 0年 1～ 8月邯钢二烧的烧结原料和生产的碱度为 1 6 5～ 1 95的烧结矿进行分析 ,认为在此原料条件下生产碱度为 1 8～ 1 9的高碱度烧结矿是可行的 ,其碱度波动可控制在± 0 0 5范围内 ,这样不仅可提高烧结矿的结块率 ,改善其粒度组成和强度 ,同时还可增产降耗。
In this paper,the production statue of ultrahigh-basic sinter in Hang Zhou I&S Co.
介绍了杭钢生产超高碱度烧结矿的情况,总结分析了超高碱度烧结矿的生产特点,以及成品矿的物理性能和冶金性能。
In order to improve BF burden composition,the sintering plant was tried to produce low basicity sinter with traveling grate.
随着天铁 6号烧结机的投产 ,烧结生产能力相对偏大 ,在公司目前的设备条件下 ,为进一步改善炉料结构 ,烧结厂试用带式烧结机生产低碱度烧结矿 ,经过不断的摸索 ,现已全面掌握了其生产特性 ,高炉使用后经济技术指标明显改善。
On the basic of the reference,aimed at high basicity agglomerated flux,the relation of the parameters including the current,voltage and welding speed,the position of the twin-wire and its space,the heat input and the form of groove was systemically analyzed by the overlaying o.
在参考相关文献的基础上,针对高强钢用高碱度烧结焊剂,通过在平板表面堆焊和V型坡口对接板试验,系统分析了焊接电流、电弧电压、焊接速度、双丝位置组合及间距、线能量、坡口形式等与焊道成形的关系。
Research on Composition of Mineral and Microstructural of High Basicity Sinter
高碱度烧结矿矿物组成及显微结构研究
The Relation between the Microstructure of Sinter Ore with High Basicity and Reduction Disintegration
高碱度烧结矿显微结构与低温还原粉化的关系
The Study on Blast Furnace Burden Structure with Different Basicity Sinter Ore
酸性和高碱度烧结矿合理搭配的高炉炉料结构研究
Research and Practice on Improvement of Taisteel Sinter Alkalinity Stability
提高太钢烧结矿碱度稳定性的研究与实践
EXPERIMENT INVESTIGATION ON INFLUENCE OF SUPERHIGH BASICITY ON SINTER PROPERTIES
超高碱度对烧结矿性能影响的试验研究
Influence of Superhigh Basicity on Sinter Properties and Sintering Parameters
超高碱度对烧结矿性能与工艺参数的影响
Practice of Improving the Sinter Strength on the 90m~2 Sintering Machine in MaSteel;
马钢90m~2烧结机提高烧结矿强度的实践
Practice About Raising Tumbler Strength of Western Zone Sinter on Ansteel
鞍钢西区烧结提高烧结矿转鼓强度的实践
Effects of Grain Size on Sintering Properties of High Iron Trihydrate Bauxite and Sinter Microstructure
粒度对高铁三水铝石型铝土矿烧结性能和烧结矿显微结构的影响
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术,具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
Study on the factors influencing sinter strength through adding different quicklime under conditions of constant alkalinity
恒定碱度条件下生石灰配比对烧结矿强度的影响研究
Influence of Australia FMG Ore Fines Proportion on High Temperature Strength of Sinter
配加澳大利亚FMG矿粉对烧结矿高温强度的影响
Study of Prediction Model of R in Sintering Process Based on Multisensor Data Fusion;
基于多传感器数据融合技术的烧结矿碱度预报模型的研究
Application of alkali-slag cementation materials in rapid determination of fired perforated bricks compressive strength
碱矿渣胶凝材料在快速测定烧结多孔砖抗压强度中的应用
Six Sigma Application in Improvement of Sinter ISO Drum Strength;
六西格玛在提高烧结矿ISO转鼓强度中的应用
Practice of Increasing Sinter Tumbler Strength of BX STEEL 360m~2 Sinter Machine
提高本钢360m~2烧结矿转鼓强度的生产实践
Experiment and Practice for Improving the Tumbler Strength of Sinter
提高烧结矿转鼓强度的试验研究与生产实践
As a result, the productivity of sinter maching greatly increased, fuel consumption decreased, the sinter quality improved.
实现了小球烧结，烧结机利用系数大幅度提高，燃耗降低，烧结矿质量得到改善。