spark sintering

基本解释放电烧结

网络释义

1)spark sintering,放电烧结2)sintering by electric impulse discharge,电脉冲放电烧结3)spark plasma sintering(SPS),放电等离子烧结4)SPS,放电等离子烧结5)spark plasma sintering,放电等离子烧结6)spark plasma sintering (SPS),放电等离子烧结

用法和例句

Ti-Ni alloy or composites of Ti-Ni alloy with ceramics (TiB2, TiC and SiC) particles were sintered in a spark sintering equipment and then heat treated.

采用放电烧结的方法制备了Ti-Ni合金及其与TiB2、TiC和SiC陶瓷颗粒弥散分布的复合体,并进行了适当的热处理。

0Cr were prepared by spark plasma sintering(SPS).

0Cr合金粉末为原料,研究了采用放电等离子烧结工艺制备Ti-A l基合金。

The silicon carbide ceramic was prepared by Spark Plasma Sintering(SPS).

本文用放电等离子烧结(SPS)的方法制备了SiC陶瓷,研究了SPS烧结温度、压力和保温时间对烧结试样力学性能的影响。

Using Si3N4-AlN-Al2O3-Y2O3 ceramic system as binding,polycrystalline cubic boron nitride(PcBN) was prepared by spark plasma sintering(SPS).

采用放电等离子烧结工艺(spark plasma sintering,简称SPS)在氮气气氛中制备了以Si3N4-AlN-Al2O3-Y2O3系为基的立方氮化硼聚晶(polycrystalline cubic boron nitride,简称PcBN)。

Heat treatment and magnetic properties of ferromagnetic bulk glassy alloy prepared by SPS;

放电等离子烧结铁磁性大块非晶的晶化处理及其磁性能研究

STUDY ON CARBON POLLUTION AND DECARBONIZATION PROCESS OF SPSED BaTiO_3 CERAMICS;

放电等离子烧结钛酸钡陶瓷的碳污染及脱碳工艺研究

Nd_2Fe_(14)B/α-Fe Nanocomposite Magnets Prepared by Sonochemistry-SPS Process;

超声化学-放电等离子烧结制备Nd_2Fe_(14)B/α-Fe双相复合磁体

Influence of sintering parameters on carbonyl iron powder prepared by spark plasma sintering;

烧结参数对羰基铁粉放电等离子烧结的影响

Study on microstructure and oxidation characteristics of TiAl alloy prepared by spark plasma sintering;

放电等离子烧结的钛铝合金组织及氧化性能研究

Microstructure of a bulk nanocrystalline Al-Zn-Mg-Cu alloy prepared by cryomilling and spark plasma sintering;

放电等离子烧结制备Al-Zn-Mg-Cu纳米晶合金的组织

Study of Dental Materials Prepared by Spark Plasma Sintering (SPS);

放电等离子烧结(SPS)技术制备牙科材料的研究

0Cr were prepared by spark plasma sintering (SPS), and the relationship among sintering temperature, microstructure and mechanical properties was studied.

0Cr合金粉末为原料,采用放电等离子烧结工艺制备出TiAl基合金,并研究了制备工艺、显微组织与室温力学性能三者的关系。

The synthesized powders were sintered by pressureless sintering technique in a graphite furnace with a flowing nitrogen atmosphere and by spark plasma sintering (SPS) technique respectively.

利用低温燃烧合成前驱物制备出平均粒度为100 nm的AlN陶瓷粉末,比较了该粉末的常压烧结和放电等离子烧结的特性。

TiB_2/BN Laminated Ceramics Composites Maked by Spark Plasma Sintering System;

放电等离子烧结法制备TiB_2/BN层状陶瓷

Ti_3SiC_2 Powders Synthesized by SPS Heat Treatment Method

放电等离子烧结热处理合成Ti_3SiC_2粉体

Fabrication of FeSiB Bulk Metallic Glasses by Spark Plasma Sintering

放电等离子烧结制备FeSiB块体非晶合金

Preparation of Ti_2SnC Electric Ceramics by Mechanical Alloying and Spark Plasma Sintering

机械合金化-放电等离子烧结制备Ti_2SnC导电陶瓷

Synthesis of the High Strength Aluminum Alloys by Spark Plasma Sintering and Their Structures and Properties;

放电等离子烧结高强度铝合金的组织与性能

Study of Dental Materials Prepared by Spark Plasma Sintering (SPS);

放电等离子烧结(SPS)技术制备牙科材料的研究

Study on Ti-Mg System Alloys by Spark Plasma Sintering Method;

放电等离子烧结技术制备Ti-Mg系合金的研究

Fabrication of TiB_2 Fine-grain Ceramics by Spark Plasma Sintering Technique;

放电等离子烧结技术制备TiB_2细晶材料的研究

Spark Plasma Sintering of AIN Transparent Ceramics;

放电等离子烧结法制备氮化铝透明陶瓷

Mechanism and Properties of Ti/Al_2O_3 Composites by Spark Plasma Sintering Technique

放电等离子烧结Ti/Al_2O_3复合材料机制及性能

Synthesis of ZrB_2-YAG-Al_2O_3 Composite Ceramics by Spark Plasma Sintering(SPS) Method

采用放电等离子烧结法制备ZrB_2-YAG-Al_2O_3复相陶瓷

Research on AlON Transparent Ceramics by SPS

放电等离子烧结氮氧化铝透明陶瓷的研究

Research on Preparation Process of Boron Carbide Ceramics Sintered by Spark Plasma Sintering

放电等离子烧结碳化硼陶瓷的工艺研究

Synthesizing of FeAl/Al_2O_3 composite by mechanical activation-spark plasma sintering

机械活化-放电等离子烧结FeAl/Al_2O_3复合材料

Fabrication of Fe-based bulk glassy alloys by spark plasma sintering

放电等离子烧结制备铁基大块非晶材料

Phase transformation of blended Ti and Al powders during spark plasma sintering

Ti、Al混合粉在放电等离子烧结过程中的相变

Spark Plasma Sintering and Mechanical Properties of Boron Carbide Ceramics

碳化硼陶瓷的放电等离子烧结及其力学性能

EFFECT OF SINTERING PRESSURE ON CEMENTED CARBIDE PREPARED BY SPARK PLASMA SINTERING

压力对放电等离子烧结硬质合金性能的影响

最新行业英语

行业英语