The optimum parameters of brazing of 2090Ce alloy in furnace brazing and vacuum brazing conditions have been provided through the researches of brazing fluxes and brazing filler metals(HL401 and Al-Ge-Si).
通过以新研制的反应钎剂和HL401钎料、Al-Ge-Si钎料对2090Ce铝锂合金进行了钎焊试验研究，提供了优化的炉中钎焊和真空钎焊工艺规范；并探讨了钎焊间隙对钎缝组织性能的影响；建立了2090Ce铝锂合金钎缝组织形态成长模型，并建立了母材溶解厚度控制模型，对钎料的选择、钎焊工艺参数的优化选择及接头钎焊间隙的确定提供了一种新的方法。
Chromium carbide/Fe-based self-fluxing alloy composite coatings produced by vacuum reactive braze coating;
碳化铬／铁基自熔合金复合涂层真空反应钎涂
In this paper,white carbide/Fe based composite coatings with bright and smooth surface bonded with a metallurgical bond to a mild steel substrate were synthesized by reactive braze coating(RBC) of the mixed carbon,iron,silicon,ferrochromium,ferrotitanium and nickel powder in vacuum braze furnace.
利用工业原料纯铁粉、硅粉、钛铁粉、硼铁粉、铬铁粉、胶体石墨以及镍粉,真空条件下通过反应钎涂于1200℃在低碳钢基体上制备了白色、表面光滑、平整且与基体为冶金结合的碳化物/铁基合金复合涂层。
Resolve of fragile and defect problem for a new contact reaction brazing aluminum to stainless steel;
为满足不锈钢电加热餐具生产的需要,提出采用接触反应钎焊的方法实现复合电热餐具的铝热管与铝板、铝板与不锈钢板结构的高致密连接。
Experimental study on LD30 aluminum contact reactive brazing;
LD30铝合金接触反应钎焊的试验研究
A new technology for contact reactive brazing of aluminum to stainless steel in composite electro-thermal cooker;
复合电热餐具铝/不锈钢接触反应钎焊新技术
Test of 6063 Al alloy contact reactive brazing has been conducted in the case of special brazing parameters,using Cu foil and Cu foil-Mg power-Cu foil as reaction layer material,the microstructure and grain boundary penetration phenomena were analyzed and discussed primarily.
采用Cu箔及Cu箔-Mg粉-Cu箔作为反应层材料,在特定的工艺参数条件下,对6063铝合金进行了真空接触反应钎焊试验,初步分析探讨了钎缝微观组织结构和晶界渗透现象。
Trend and Current Situation of Flux for Aluminium and Its Alloys;
铝及铝合金用钎剂的发展现状和趋势
Mechanism of brazing flux reacting with oxide film of LY12 aluminum alloy;
LY12铝合金氧化膜与钎剂的反应机制
Study on the Reaction Flux for Al-Li Alloy Brazing;
铝锂合金钎焊反应钎剂的研究
Contact reactive brazing between Al alloy/Cu/stainless steel and analysis on grain boundary penetration behaviors
铝合金/铜/不锈钢接触反应钎焊及晶界渗透行为分析
Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;
Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究
Interfacial reaction of active brazing between Al_2O_3 ceramic and metal Ni
Al_2O_3陶瓷与金属Ni活性钎焊界面反应
Research on the Liquid Structure of Lead-free Solders and the Interfacial Reaction during Soldering and Their Correlation;
无铅钎料的液态结构与钎焊界面反应及其相关性研究
Interfacial reaction between solder alloys and metallization during laser solder bonding process for optical fiber alignment
光纤定位激光钎焊键合过程中钎料与镀层的界面反应
The Research of Brazing Application for Measuring Installation of Fast Neutron Experimentation Reactor;
快中子实验反应堆测控装置钎焊技术研究
Interfacial Reactions and Alignment for Fiber Bonding by Laser Soldering;
光纤激光钎焊键合过程中界面反应及对准研究
The Study on Reactive Wettability of SnAgCu Solder Alloy on Au/NiFe/Cu PAD
SnAgCu钎料合金在Au/NiFe/Cu焊盘上的反应润湿研究
Reaction mechanism and microstructure of interface in soldered joint of zinc-based alloy
锌基合金钎焊界面区的反应机制及组织结构
Transient Contact Liquid-Solid Reaction of Solder Droplet/Pad and Interfacial Microstructure Evolution;
钎料熔滴/焊盘瞬间接触液固反应及界面组织演变
Development on High-frequency Induction Brazing Solder of Al/45 Steel
Al/45钢高频感应钎焊焊料的研制
Development of Brazing Grease for Stainless Steel-Aluminum in High Frequency Induction Brazing;
不锈钢—铝高频感应钎焊膏状钎料的研制
Temperature Field Analysis of High-frequency Induction Brazing and Experimental Verification;
高频感应钎焊温度场分析与试验研究
Residual Stress Field Analysis of Monolayer Brazed Diamond Tools;
单层钎焊金刚石工具的残余应力分析
Study on the Hi-frequency Induction Brazing of Diamond Tools
金刚石刀具高频感应钎焊工艺的研究
Study on the Post-weld Heat Preservation Technology of Hi-frequency Induction Brazing for PCD Cutting Tools;
PCD刀具高频感应钎焊焊后保温工艺研究
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.
介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。