electrolysis polishing

基本解释电解抛光

网络释义

1)electropolishing[i,lektrəu'pɔliʃiŋ],电解抛光2)Electrolytic polishing,电解抛光3)electrochemical polishing,电解抛光4)electrolysis polishing,电解抛光5)electro-polishing,电解抛光6)electrolytic polishing slice,电解抛光片

用法和例句

The Study on Electropolishing of WC-Co Cemented Carbide;

YG类硬质合金刀具电解抛光的研究

Feasibility of tungsten electropolishing in sulfuric acid–methanol electrolyte

硫酸–甲醇体系钨电解抛光的可行性研究

This paper introduces application of electrolytic polishing and electrolytic corrosion in stainless steel sample preparing for metallographic examining, The test results indicate that using electrolytic polishing and electrolytic corrosion to prepare examining sample can obtain microstructure with clear resolution.

文章介绍采用电解抛光及电解腐蚀的不锈钢金相检验制样过程 ,试验结果表明 ,电解抛光及腐蚀法制备试样能获得清晰组织。

Based upon experiements made for many times, the paper presents the method and the conditions under which a tin alloy′s metallographic specimen can be prepared through applying electrolytic polishing.

本文是在通过多次试验的基础上,介绍一种用电解抛光法制备锡合金金相试样的条件和方法,按此方法处理的试样显微组织形貌清晰。

The article presents a new technology of electrolytic polishing by a neutral solution and the sychronization of polishing and removal of oxide from weldments of stainless steel.

主要介绍中性溶液电解抛光新技术及其对不锈钢焊接件氧化及去除的同步作用。

The basic principle of electrochemical polishing is summarized.

阐述了电解抛光的基本原理 ,以S1 36不锈钢为对象 ,在实验的基础上进行了电解抛光工艺的初步研究。

The paper concerns in the fabrication of ultra-fine molybdenum wire used for Z-pinch physics experiment by alternating current electrolysis polishing method.

研究利用交流电解抛光技术制备用于惯性约束聚变Z-pinch物理实验的超细钼丝。

The microscopic action of magnetic field on electrolysis polishing is hard to be observed through experiment.

通过实验很难观测到磁场对电解抛光的微观作用,因此参照带电粒子在磁场中运动的作用机理,建立起电解抛光时电磁场作用下的带电粒子运动模型。

In view of the tiny electrolysis polishing request,processing workpiece with electrolyze processing or Electrolysis polishing in use of electrochemical micromaching equipment of three-dimensional micro workpiece designed by our own.

针对微细电解抛光的要求,应用所开发的三维微细零件电解掺粉抛光装备对工件进行电解或电解抛光

The Application of Anodic Polarization Curves of CuSn Alloy Contact Wire in Electro-polishing

阳极极化曲线在CuSn合金接触线电解抛光中的应用

The parameters of electro-polishing of CuW,CuWCr contact materials was studied in this paper.

对CuW、CuWCr触头材料的电解抛光参数进行了研究。

This paper used acetic acid,8% nitric acid, denaturalization ammonium chloride solution and electro-polishing erode ZK60 casting ingot.

采用乙酸苦味醇溶液、8%硝酸溶液、变性饱和氯化铵溶液以及电解抛光等方法对ZK60铸锭进行了宏观组织的腐蚀观察,结合宏观组织对凝固过程中ZK60铸锭组织的形成做了简要的讨论。

The Study on Electropolishing of WC-Co Cemented Carbide;

YG类硬质合金刀具电解抛光的研究

Electropolishing and Its Application in Electron Backscatter Diffraction Technology

电解抛光技术在电子背散射衍射分析中的应用

Design of Electrochemical Microaching Setup and Related Experiments

微细掺粉电解抛光设备设计及其工艺试验研究

Feasibility of tungsten electropolishing in sulfuric acid–methanol electrolyte

硫酸–甲醇体系钨电解抛光的可行性研究

Emulation Analysis of the Magnetic Force Electrolysis Polishing and Parameter Optimization of the Dry-type WEDM;

磁力电解抛光仿真分析与干式电火花线切割参数优化

Energy-saving Improvement of Oil Pump Impeller Flowpath Surface Treated with Electrolytic Polishing

输油离心泵叶轮流道表面的电解抛光节能改进设计

The Application of Anodic Polarization Curves of CuSn Alloy Contact Wire in Electro-polishing

阳极极化曲线在CuSn合金接触线电解抛光中的应用

Development and Software of Three-dimensional Electrochemical Sophisticated Polishing Machine for Micro-machining

三维微细零件掺粉电解抛光机床的研制及软件开发

Apical shapes were formed through electropolishing in the1- M NaOH water solution at2 volts with reciprocating the electrode array.

尖端的形状通过电解抛光法构成,2伏的电压在电极阵列和1M氢氧化钠溶液之间互换。

Research on Electrolytic-mechanical-magnetic and Portable Polishing Machine;

电解-机械-磁力便携式抛光机的研制

Investigation on Reciprocating Electrolytic Mechanical Compound Polishing and the Process Analysis

电解机械复合抛光试验及其过程分析

3D Design and Simulation of Mechanism Motion of Electrolysis Abrasive and Mechanic Complex Finishing Machine

电解机械复合抛光机的三维设计及运动仿真

Study of Polishing Babbitt Metal Mould by Mechanical Electrolytic Processing

巴氏合金模具的机械电解复合抛光研究

electric polisher

电热抛光机,烫光机

Development of Electrorheological Polishing Device and Path Planning for Electrorheological Polishing;

电流变抛光装置开发与抛光轨迹规划

The 3D Parametric Modeling for the Electrolysis Abrasive Finishing Machine Based on Pro/E

基于Pro/E的电解机械复合抛光机三维参数化建模研究

A Study on a Polishing Process of Cr12 Hardening Steel with the Embedded Combined Tools

基于嵌片式复合工具的电解-机械抛光Cr12淬火钢实验研究

Also, the forging and casting products are in our range.

表面处理由振动研磨,手工抛光,电解电镀上光,部分电离子分离等技术处于国际领先水平。

最新行业英语

行业英语