The wear debris of three semi-metallic friction materials reinforced by low carbon steel fiber,brass fiber and pure copper fiber respectively,and grey cast iron couple woren at different temperatures were studied by XRD and EDAX.
采用X射线衍射(XRD)和X射线能谱分析(EDAX)对分别使用低炭钢纤维、黄铜纤维和紫铜纤维增强的3种半金属摩擦材料与灰铸铁在不同温度下滑动摩擦形成的磨屑进行分析,并结合扫描电子显微镜(SEM)观察摩擦材料表面形貌,分析材料的磨损特性,并对黄铜纤维和紫铜纤维增强的摩擦材料磨屑成分进行对比分析。
The tribological properties of semi-metallic friction materials with nano-SiC were studied.
使用定速摩擦试验机研究了纳米CaCO3对半金属摩擦材料性能的影响。
The paper simply introduces the components of semi-metallic friction materials.
介绍了半金属摩擦材料的组成,用二水平七因素的正交设计对半金属摩擦材料的配方进行优化设计。
Using a D MS friction tester, the friction and wear characteristics of a friction couple of semi metallic friction material and grey cast iron are tested.
采用D MS定速式摩擦试验机 ,测定 3种金属纤维 (钢纤维、黄铜纤维和紫铜纤维 )增强的半金属摩擦材料与灰铸铁在不同温度下滑动摩擦的摩擦磨损性能 ,并收集磨屑 ,借助SEM扫描电子显微镜 ,观察、分析磨屑的形貌 ,研究材料磨损的内在机制 。
The friction and wear behavior of two semi metallic friction materials containing MoS 2 or graphite as the lubricating phase has been investigated on a D MS friction and wear tester.
利用 D- MS型定速摩擦试验机 ,考察了 2种润滑相对半金属摩擦材料摩擦系数和磨损率随温度变化的影响情况 ,并采用扫描电子显微镜 (SEM)和 X射线能量色散谱等 (EDAX)分析了 2种复合摩擦材料中各组分对摩擦磨损性能的交互作用 ,揭示了半金属摩擦材料摩擦磨损的特性和机
Evaluation of Friction Performance and Friction Mechanism of Semi-Metallic Friction Materials;
半金属摩擦材料摩擦性能评价和摩擦机理研究
Study on Mechanical and Tribological Properties of Semi-metallic Friction Materials Modified with SACF
SACF纤维改性半金属摩擦材料的力学及摩擦学性能研究
This factory product versatility, uses in not having the asbestos, semimetal domain and so on friction material、 ceramics, coating, metallurgy.
本厂产品用途广泛，用于无石棉，半金属摩擦材料、瓷、料、金等领域。
Effect of Modifi ed Thermosetting Resin Content on the Frictional and Wear Characteristics of Semi-metallic Friction Material Made with Wet Method
湿法制备半金属摩擦材料中改性的热固性树脂含量对摩擦磨损性能的影响
Roles and Mechanisms of Zircon in Semi-Metelic and Non-Metallic Friction Materials;
硅酸锆在半金属和无金属摩擦材料中的作用和摩擦机理研究
Advantage and defect of semi-metallic, none-asbestos polymer and powder metallurgy were discussed.
探讨半金属基摩擦材料、非石棉有机摩擦材料和粉末冶金摩擦材料的优缺点。
Sintered metal friction materials-Determination of density
GB/T10421-1989烧结金属摩擦材料密度的测定
Wet type (non-metallic)friction materials
GB/T13826-1992湿式(非金属类)摩擦材料
Sintered metal friction materials-Determination of tension strength
GB/T10423-1989烧结金属摩擦材料抗拉强度的测定
Sintered metal friction materials-Determination of transverse rupture strength
GB/T10422-1989烧结金属摩擦材料横向断裂强度的测定
Sinterd metal friction materials-Determination of apparent hardness
GB/T10425-1989烧结金属摩擦材料表观硬度的测定
Sintered metal friction materials-Determination of compression strength
GB/T10424-1989烧结金属摩擦材料抗压强度的测定
The Friction and Wear Properties of PTFE-Based Metal Composites;
PTFE基金属复合材料的摩擦磨损性能研究
Effect of Magnetization on the Tribological Properties of Metal Material;
磁化处理对金属材料摩擦磨损性能影响的研究
Test and simulation for dry friction characteristics of metallic materials
金属材料干摩擦特性的实验与仿真研究
Simulation Study on the Dry Friction Characteristics of Metallic Materials Based on Test
金属材料干摩擦特性仿真方法与试验验证
Study Situation of Fabricated Metal Matrix Composites by Friction Stir Processing
搅拌摩擦加工制备金属基复合材料的研究现状
Preparation and Tribological Property of Self-lubrication Metallic Plastic Composite
金属塑料复合自润滑材料的制备及其摩擦学性能研究